Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad (2) from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Fill the water tank (1), making sure not to pass the level mark. 4. Unwind the mains cable (6) fully and plug it into an earthed socket. 5. Set the main power button / switch (12) to the on position “I” (button or pilot light 17* illuminated in red). 6. The “Steam ready” indicator lamp (9) will light up after several minutes, indicating that the appliance is ready to use. When using the steam generator for the first time, or when using it straight after Calc’n’Clean, the steam generator will take slightly longer to heat up. 7. This appliance has a built-in water level sensor. The “refill water tank” indicator (11) will light when the water tank is empty. or (model dependent) : If the “steam ready” lamp (9) lights and steam is not released when pressing the trigger (15 or 16*), refill the water-tank. Important: • Normal tap water can be used. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier. • The water tank can be filled at any time while using the appliance. • To avoid damage and/or contamination of the water tank and the boiler, do not put perfume, vinegar, starch, descaling agents, additives or any other type of chemical product into the water tank. Any damage caused by the use of the aforementioned products, will make the guarantee void. • The iron is not designed to rest on its heal. Please always position it horizontally on the iron pad (2). • The iron pad can be placed into the specially designed recess on the appliance or somewhere suitable alongside the ironing area. Never rest the iron on the appliance without the iron pad!. • During its first use the iron may produce certain vapours and odours, along with white particles on the soleplate, this is normal and it will stop after a few minutes. • While the steam release button is pressed, the water tank may produce a pumping sound, this is normal, indicating that water is being pumped to the steam tank. * model dependent BOSCH 7 3 Setting the temperature 1. Check the ironing instruction label on the garment to determine the correct ironing temperature. 2. Turn the temperature selector (14) to the required setting: • Synthetics •• Silk – Wool ••• Cotton – Linen 3. The indicator lamp (18) will remain lit while the iron is heating and go out as soon as the iron has reached the selected temperature. Tips: • Sort your garments out based on their cleaning symbol labels, always starting with clothes that have to be ironed at the lowest temperatures. • If you are not sure what the garment is made of then begin ironing at a low temperature and decide on the correct temperature by ironing a small section not usually seen when worn. • At the beginning of each use, it is possible that drops of water will be dispensed alongside steam. Therefore, it is advisable to try the iron on the ironing board or a piece of cloth to start with. 4 Ironing with steam 1. Turn the temperature selector (14) to the required setting. 2. Set the amount of steam to suit your needs, using the variable steam control (10*). For normal use, please choose one of the following recommended settings: Temperature Steam setting • •• ••• 3. Press the steam release button (15 or 16*) to release steam. Attention: When ironing on a lower temperature setting “•”. • If the appliance has variable steam control (10*), set the variable steam control to its lowest position . • If the appliance does not have variable steam control, press the steam release button only for a few seconds at a time when ironing at lower temperatures. * model dependent In both cases, if you find that water is dripping out of the soleplate, set the temperature selector (14) to a higher position (take care that the garment can be ironed on this heat temperature setting). • At the beginning of each use, it is possible that drops of water will be dispensed alongside steam. Therefore, it is advisable to try the iron on the ironing board or a piece of cloth to start with. Tip: for better ironing results, iron the last strokes without steam to dry the garment. 5 “PulseSteam” function (model dependent) This appliance has a special function for tackling difficult creases. When the steam release button is activated, the steam generator will give three powerful shots of steam so that the steam reaches even deeper into the fabrics. 1. Set the temperature selector (14) on “•••” 2. Press the steam release button (15) on the bottom of the handle two times shortly (double-click). or (model dependent) Shortly press the steam release button (16*) on the top of the handle. Remark : It is possible t...
Dieses Handbuch ist für folgende Modelle:Bügeleisen - TDS2011GB/02 (2.18 mb)
Bügeleisen - TDS2011GB/03 (2.18 mb)
Bügeleisen - TDS2015GB/01 (2.18 mb)
Bügeleisen - TDS2021GB/01 (2.18 mb)