Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 3.54 mb Dateiname: Unterrichtssprache:

Do not use distilled water only. 1 2 3 4 Make sure the appliance is unplugged. Set the steam control to position 0 (= no steam). Open the cap of the filling opening. Tilt the iron backwards and use the filling cup to fill the water tank with tap water up to the maximum level. Do not fill the water tank beyond the MAX indication. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. 5 Close the cap of the filling opening (‘click’). selecting the temperature and steam setting temperature and steam settings Fabric type Temperature setting Steam setting Steam boost Ionic DeepSteam(specifictypes only) Linen MAX 5-6 \yes Cotton 33-4 \yes Wool 21-2 N.A. yes Silk 10 N.A. N.A. 10 EnGlish Fabric type Temperature setting Steam setting Steam boost Ionic DeepSteam (specifictypes only) Synthetic 0 N.A. N.A. fabrics (e.g. 1 acr ylic, nylon, polyamide, polyester) 1 Specific types only: remove the heat-resistant protective cover. Do not leave the heat-resistant protective cover on the soleplate during ironing. 2 3 Put the iron on its heel. To set the required ironing temperature, turn the temperature dial to the appropriate position (see the ‘Temperature and steam settings’ table above). Check the laundr y care label for the fabric type. If you do not know what kind or kinds of fabric an ar ticle is made of, determine the right ironing temperature by ironing a par t that is not visible when you wear or use the ar ticle. Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To prevent stains, do not use the spray function. Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of synthetic fibres. EnGlish 11 4 Set the appropriate steam setting (see the ‘Temperature and steam settings’ table above). Note: Make sure that the steam setting you select is suitable for the set ironing temperature. 5 Put the mains plug in an earthed wall socket. The amber temperature light goes on. ,6 When the amber temperature light has gone out, wait a while before you start ironing. The temperature light goes on from time to , time during ironing. using the appliance Note:The iron may give off some smoke when you use it for the first time.This ceases after a short while. ironing without steam 1 2 Set the steam control to position 0 (= no steam). Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). 12 EnGlish steam ironing 1 2 3 Make sure that there is water in the water tank. Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). Note:The iron starts to produce steam as soon as it reaches the set temperature. steam ironing with extra steam 1 For extra steam during ironing, press and ho...

Herunterladen

Geben Sie zwei Ziffern: