Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
TIP: Refer to the Ironing Guide (on Page 8) for the recommended setting for your fabric. IMPORTANT: When not ironing, always set the Steam Lever to O/Off (Dry) and the Fabric Slide to OFF. USING THE IRON’S SPECIAL FEATURES SPRAY MIST ® FEATURE The SPRAY MIST ® feature is a powerful water spray mist to aid in removing wrinkles from heavy fabrics and for setting To use the SPRAY MIST ® Feature: Press the SPRAY MIST ® button firmly. SHOT OF STEAM ® FEATURE (Select Models Only) The SHOT OF STEAM ® feature provides an of stubborn wrinkles. can use this feature ironing, but the water reservoir To use the SHOT OF STEAM ® Feature: Place the iron on top of the wrinkle and press the SHOT OF STEAM ® button each time you would like an extra burst of steam. The SHOT OF STEAM ® feature may be used continuously with just a short pause between shots. VERTICAL STEAM (Select Models Only) The vertical steam feature allows your iron to function as a garment steamer. TIP: When using the vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. To use Vertical Steam: 1. Make sure that the iron has heated up (2 minutes). 2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam. 3. With your other hand, pull the fabric tight. 4. Press the SHOT OF STEAM ® button for approximately 3-second intervals as you move the iron across the wrinkled area. WARNING: To prevent the risk of burns, keep your hand away from the area being steamed. WARNING: DO NOT steam garments while wearing them; this may result in injuries. TIMED AUTO-OFF (Select Models Only) After 30 minutes, the power indicator light will flash steadily. This indicates that the iron is no longer heating. To restart the iron, push button to restart. If you do NOT want to iron any longer, unplug the iron. Then turn the small Steam dial to Dry/O and the large Fabric/Temperature dial to Off/O. WARNING: Auto-Off is a safety feature and is not a recommended means turning your iron off. See “Caring for Your Iron After Use. ” PATENTED MOTION SMART ® AUTO-OFF FEATURE (Select Models Only) When the iron is plugged in, the Power Indicator will indicating that there is power to the iron. If you leave the iron: • in a horizontal position without moving it, it will automatically stop heating after 30 seconds. The Power Indicator will blink to let you know that the iron has • in a vertical position (on its heel rest) without moving it, the iron will automatically turn off after 15 to let you know that the iron has IMPORTANT: The Power Indicator will continue blink until the iron is unplugged or reset. To reset the iron: Move the iron The indicator will stop blinking 54 WARNING: The patented MOTION SMART ® Auto-Off is a safety feature, not a recommended means for turning your iron off. See “Caring for Your Iron After Use” for information on turning off your iron and storing it safely between use. CARING FOR YOUR IRON AFTER USE TURNING OFF YOUR IRON 1. Turn the Steam Lever to O/Off (Dry) and Fabric Select Slide to Off. 2. Unplug the iron from the power source. WARNING: NEVER yank the power cord when unplugging the iron. This can damage the cord. STORING YOUR IRON 1. Allow the iron to cool. 2. If you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the fill hole cover, and allow water to flow from the fill hole. Shake the iron gently to remove trapped water drops. 3. Loosely loop the power cord around the heel rest and store the iron on its heel rest. IMPORTANT: Wrapping the cord around the iron too tightly can damage the cord. TIP: When not ironing, always set the Steam Lever to O/Off (Dry) and the Fabric Select Slide to Off. MAINTAINING YOUR CLASSIC IRON CLEANING THE SOLEPLATE Clean the soleplate if starch or other residue accumulate. To clean the Soleplate: 1. Allow the iron to cool and then wipe it with a soft, damp cloth. WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar the soleplate. This will damage the finish. 2. Run the iron over an all-cotton cloth to remove any USING THE SELF-CLEANING FEATURE You should use the Self-Cleaning feature once the optimal performance of your iron. To use the Self-Cleaning feature: 1. Move the Steam Lever back and forth O/Off (Dry) several times to remove debris and minerals from the Steam Valve. This keeps water flowing into the steam chamber. 2. Fill the water reservoir with the MAX line. 3. Set the Fabric Select 4. Plug the iron into iron to heat for 2 5. Turn the Fabric Select unplug the iron. 6. Hold the iron WARNING: Be careful not to touch the iron’s hot surfaces. 7. Press the self-clean button and hold. Water will begin dripping from the steam vents. To make sure that all of the water is removed from the tank, slowly rock the iron side to side and front to back for 30 seconds. When rocking the iron...
Dieses Handbuch ist für folgende Modelle:Bügeleisen - 3964-099 (234.36 kb)