Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Shark Dateigröße: 654.75 kb Dateiname: Unterrichtssprache:

Self cleaning feature flushes internal sole plate with water. 4. Anti-Drip Function Cuts off water when the iron temperature is too low. 8. Water Filling Inlet The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing. 6. Stainless Steel Soleplate Provides maximum glide- ability and heat retention. 5. Built-In Anti-Calcium Filter Prevents calcium build- up and prolongs the life of the iron. 8 IRONING CHART NOTE: Always refer to the garment care tag for ironing instructions. Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam. 9. CordThe power cord is easily stored inside the iron using the cord rewind button. CAUTION: Always hold the plug when rewinding the power cord. Do notallow plug to whipwhen rewinding. 123 LED Display Panel7. Led Display PanelDisplays the fabric setting (left) and the temperature indicators (right). DIRECTIONSON LABELFABRICLED DISPLAY PANELSTEAMCONTROLBURST OFSTEAMSPRAYPlease note that on the label means ‘THIS ARTICLE CANNOT BE IRONED!” COTTONLINENSYNTHETIC FIBERS, e.g.acrylic, nylonpolyesterSILKWOOLMIN• •• •• • MAX0MAXIMUMSTEAM0 OPERATING INSTRUCTIONS 4 OPERATING INSTRUCTIONS Emptying the Iron 1. Always empty iron after each use. 2. When finished using the iron, turn the variable steam control to “0” and press the electronic temperature control button until the power light is lit. 3. Unplug the iron from the electrical outlet. 4. Turn the iron upside down over the sink with the tip pointing downward and allow the water to flow from the opening. 5. Place iron upright and allow to cool before storing. CAUTION: Use caution when emptying the iron. Burns may occur from touching hot metal surfaces, hot water or steam. 7 Self Cleaning It is important to “Self Clean” the iron at least every two weeks to remove scale, calcium, etc. The harder the water, the more often the iron should be self cleaned. 1. Set the variable steam control to any steam position. 2. Fill the water tank up to the “MAX” level. 3. Stand the iron on its heel. Plug the iron into the electrical outlet. 4. Press the electronic temperature control button until you get the “MAX” temperature setting on the display panel and wait until the iron heats up and temperature setting light stops flashing. (Fig. 7) 5. Turn the variable steam control all the way to the right to the self- cleaning position and hold the iron horizontally over the sink. (Fig. 7) 6. Boiling water and steam wil now be ejected from the holes in the soleplate. The impurities and scale are washed away with it. 7. Move the iron back and forth as this happens. 8. If there is any water left in the water tank after the iron stops steaming, just empty the remaining water in a sink following the instructions for emptying the iron. 9. Turn the variable steam to the “0” position when the water tank is empty. 10. Place the iron back upright on its heel to cool down before storing. This appliance is for HOUSEHOLD USE ONLY and may be plugged into any 120V AC polarized electrical outlet. Do not use any other type of outlet. Dry Ironing For dry ironing, slide the variable steam control all the way to the left to “0”. This will cut off the steam flow if water is in the water tank. All marked fabric settings on the LED Display Panel can be used for dry ironing. 1. Plug the cord into a polarized, 120V AC electrical outlet. The power “ON” light will come on, indicating that the iron is receiving power. 2. Press on the electronic temperature control button to select the desired fabric/temperature setting. Turn the variable steam control to “0”. (See “Ironing Guide” for a guide to temperature selection.) 3. Place iron on its heel (on a stable, protected surface) while iron is warming to desired temperature. Steam Ironing CAUTION DO NOT aim iron at face, towards yourself, or anyone else while using or adjusting steam. Burns or serious injury may occur. 2. Plug the cord into a polarized, 120V AC electrical outlet. 3. Press on the electronic temperature control button to select the desired fabric and temperature setting. Turn the variable steam control dial to the desired steam setting. (See “Ironing Guide” for a guide to temperature selection.) WARNINGBefore filling the iron with water, be sure the iron is not plugged into the electrical outlet. The iron may be filled with water while it is hot. CAUTIONTO PREVENT THE RISK OF BURNS, use caution when filling iron with water. Burns can occur from touching hot metal parts, hot water, or steam. Fabric & Temperature Indicators Press on the Electronic Temperature Control to select the desired fabric setting. The red lights at the left of the LED Display Panel will light up. At the same time, the temperature indicator lights on the right side of the LED Display Panel will start to flash. They will stop flashing when the iron reaches the selected temperature. Note: Because of the soleplate design, ordina...

Herunterladen

Geben Sie zwei Ziffern: