Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Kalorik Dateigröße: 836.09 kb Dateiname: Unterrichtssprache:

SPRAY • Produces a mist for removing stubborn creases. • Spray can be used at any temperature setting and during either dry or steam pressing, provided there is water in the tank. Press down the spray button to spray. SELF-CLEANING To remove dirt and dust, the iron should be cleaned at least once a month. • Fill the iron with water to 1/2 of its maximum capacity. Turn the steam regulator to “0” or “No Steam” position and the thermostat dial to the MIN position. Plug the iron into the mains socket. • Turn the thermostat dial to Max position. • Wait until the power indicator light goes off, i.e. the steam iron has reached its preset temperature. • Hold the iron horizontally over a sink or basin. • Press the “Self-cleaning button” and hold it down while shaking the iron lightly to eliminate the dirt. The plate gives off hot water and steam. 8 DA31066 / 31067 -091112 Assembly page 8/16 • • During this operation you can press the steam button a number of times, remembering to pause for at least five seconds between one burst of steam and the next. • When the tank is empty, release the Self-cleaning button. • At the end, turn the thermostat dial to the MIN position and unplug the iron from the mains socket. Leave the iron to cool and clean the plate with a soft cloth. RETRACTABLE CORD • To unwind, simply pull the cord to desired length. Do not try to unwind cord beyond its maximum capacity (See : Fig. 2) • In case the cord is not pulled out easily, pull cord firmly. • To rewind the cord, please hold the cord firmly in one hand while pressing and holding the “Cord Release” Button while guiding the cord into the storage area. Failure to hold the plug may cause plug to fly and hit you or objects/persons around you (See : Fig. 3) • The cord reel is compact, to enable a multi-layer winding of the cord. In case the cord cannot fully rewind, pull out the cord and steer cord evenly on the reel. Fig.2Fig.3 CAUTION: Always hold the plug while retracting the cord. Do not let the cord retract freely. Cord may jam on reel or loose cord may whip back and forth and could cause injury. Do not allow children to play with the retractable cord feature as the cord may cause injury. 9 DA31066 / 31067 -091112 Assembly page 9/16 • WHEN YOU ARE FINISHED IRONING • Turn the temperature dial to "MIN" and unplug iron from electrical outlet. • Rewind the power cord. • With the soleplate facing away from you, turn the iron upside down to empty the water tank. • Then store the hot iron on its heel so that any remaining moisture will evaporate. When the soleplate has totally cooled down, you may store the iron away. CARE AND CLEANING • Clean the iron regularly according to the hardness of the water and the use frequency (see section : SELF CLEANING) • Never use vinegar or other liquids to descale the iron internally. • To clean the plastic parts of the iron, use a humid cloth. • To clean the stainless steel soleplate, make sure you use a product made especially for this purpose. Never use abrasive products. • Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. • If the fiber adheres to the soleplate, use a damp cloth with vinegar to wipe off the soleplate. • Never use strong acid or alkali in order to avoid damaging the soleplate. • If limescale blocks the steam hole, please remove it with a toothpick; taking care not to damage the surface of the soleplate. 10 DA31066 / 31067 -091112 Assembly page 10/16 • TROUBLESHOOTING Iron won’t heat * Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp. * Is the Thermostat Dial turned to a fabric setting? Water is leaking out of the iron * Do not overfill the water tank. * If steam ironing, is Steam Regulator in the steam position and the Thermostat Dial in the steam range ? Did the iron have enough time to preheat? * If dry ironing, make sure the Steam Regulator is in the 0 (no steam) position. * If using burst steam, press button less frequently (not more than once every two seconds. * Follow the Self-cleaning instructions one or two times with tap water (not distilled) to “condition” the iron. Iron won’t steam * Check the water level. * Is the Steam Regulator in the STEAM position? * Has the iron had enough time to preheat? Iron leaves spots on clothing * ALWAYS empty the Water Reservoir of the iron after using. Water left in the tank may discolor clothing and soleplate. Wrinkles not removed * Check Thermostat Dial is set to correct fabric. Fabric/Clothing scorched * Check Thermostat Dial and set to lower setting. * Allow iron to cool down 5 minutes before continuing. Twisted cord * If iron cord should become twisted, turn iron off (o), turn Thermostat Dial to MIN (o) and unplug iron. Let cool. Empty water from iron. Hold iron cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of your iron cord. 11 DA31066 / 31067 -091112 Assembly page 11/16 • WARRANTY We suggest that you complete a...

Herunterladen

Geben Sie zwei Ziffern: