Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Panasonic Dateigröße: 1.52 mb Dateiname: Unterrichtssprache:

Pump the jet of steam button several times at the beginning of each ironing session. 6. Allow at least 5 seconds between uses of jet of steam to prevent water spotting. Use a press cloth if necessary (This picture is NI-H20NR) SELF-CLEANING (NI-H20NR/H24NR Only) With the self-cleaning feature you can flush out mineral residue from the steam generating chamber and the steam vents, refreshing your iron each time for a longer steaming life. It is very important to operate the self-cleaning feature after each steam ironing to prevent mineral accumulations from hardening. 1. Check water level. Water level should be at 1/2 full mark. When water level is below 1/2 full, fill with water according to the instructions in "How to Fill". 2. Preheat at "6" setting, (in about 1 -2 minutes) Makes sure that the steam button is in the Dry position. 3. Set the dial to OFF and remove the AC plug. 4. Hold the iron horizontally over the sink. 5. Pump the "Jet of Steam" button quickly (at least 3 times per second) about 20-30 times. 6. While self-cleaning, move the iron up and down slowly to help clean the entire inside and let the water drip out of the soleplate vents. 7. Check that all water and steam has completely stopped stop coming out of the soleplate vents. After self-cleaning is finished dump empty any remaining water from the iron 8. Iron on a towel to remove any drops of water remaining on the bottom of iron. 9. Cool as usual and store the iron on its heel rest. Never store an iron on its soleplate or with water in it. (This picture is NI-H20NR) NOTE: If water still remains inside the soleplate after self-cleaning operation, dry out the iron by vaporizing the remaining water setting the iron on the "6" setting, and follow the instructions under "AFTER EACH USE". FABRIC IRONING CHART HOW TO CARE FOR YOUR IRON AFTER EACH USE 1. Turn iron off and unplug. 2. Empty iron immediately after using, Don't store the iron with water in it. 3. Depress the steam button down into the dry position. 4. Wait until the iron has cooled before storing it, and always set it on the heel rest to protect the soleplate from scratches, corrosion or stains. 5. After letting iron cool completely, push the cord wind button to wind the cord. Store iron vertically in a safe place after winding cord completely. (NI-H20NR/H24NR only) MAIN BODY After unplugging and cooling the iron, simply wipe off with a damp cloth and if necessary, use a mild detergent. NEVER USE ANY HARSH CLEANERS. SOLEPLATE Starch and other residue may be easily removed from the soleplate with a da...

Herunterladen

Geben Sie zwei Ziffern: