Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Turn the grooved tubes on each side of the support to fasten, then hang the steam head between the prongs at the top. • Align the shoulders of the garment on the hanger and allow it to hang freely. • When pressing clothing, temperature, humidity and pressure are important. Because the steam released is of high temperature (212SF). temperature and humidity conditions for easy pressing are sufficient. Since clothing is hung from the support and hangs freety. the pressure on the garment may be weak. Thus, one hand should control the handle of the steam head and the other hand should be placed in the pressing glove, as shown in the image, to hold the garment steamer and allow for pressure to be applied. The hand holding the handle and hand holding the garment should move In unison to facilitate quick and easy pressing As with regular ironing, the steam pressing process requires some getting used to. Practice by repeating the process a number of times can quickly facilitate easy steam pressing • When pressing clothing, move the handle lightly In upward and downward movements only. (Note: Shaking the handle and/or moving it from side to side can result In water droplet creation on the steam release openings.) • If the hose becomes bent during use (e.g. when pressing the lower portion of garments), a gargling noise may be heard and it could lead to the collection of water droplets in the steam release handle. If the hose is bent, the steam spray oould be temporarily weakened. • If the above occurs, hold the handle up for 2-3 seconds, after which it should be tapped lightly on the palm of one hand while in an upright position in order to loosen the collected water droplets. The water Is sent back into the main unit, and water droplets are not formed during pressing. • When pressing clothing, put on the pressing glove, and use the crease dip to easily create creases. Practice by Repetition 6 CLEANING MINERAL DEPOSITS One common problem with a steamer is mineral deposits caused by a high mineral content in many municipal water supplies. Mineral residue inside of the internal pipes and heater can cause intermittent steaming or, in some cases, no steaming at all. NOTE: To reduce or eliminate the occurrence of mineral deposits, we recommend the use of de-mineraiized or distilled v/ater in the unit. However, regular tap water can also be used. STEAMER MAINTENANCE Clean and rinse your steamer regularly: All steamers need to be cleaned and rinsed on occasion to remove mineral deposits. If steam from the steamer becomes intermittent or stops altogether, please refer to the section on cleaning of mineral deposits. Never use additives: Additives such as salt, perfumes and dyes should never be added to the water tank. These substances will corrode or clog internal parts. Steam in a vertical, upright position: Do not use the steamer in a horizontal position like an iron Steam in a vertical up and down motion. This will allow the condensation in the hose to flow back into the steamer Do not pull the steamer by the power cord: Pulling the steamer by the power cord may cause the internal wiring to become loose. Storing the steamer: Before storing the steamer for an extended period (30 days or more), empty all water from the unit. Water becomes stale with time and may dog internal parts. 7 TROUBLESHOOTING Issue 1 Question Solution Steam release has been decreased. Since the water tank is likely empty, refill it and then turn the steam press back on. The hose makes a gargling noise, and water droplets have collected in the handle. If the hose is used for a substantial time in a bent state, a gargling noise is emitted, and water droplets collect In the handle. When this happens, extend the hose upward so it is not bent and hold for 2-3 seconds. Water droplets appear on the steam head. Hang hose at top of hanger for 30 seconds to dear passageway for the steam. Should the water tank be filled with only cold water? Yes, fill the water tank only with cold water. Power light is not turned on and steam unit doe snot seem to be producing steam. Check the outlet to see if power supply Is normal.Connect another electric device to the outlet and check to see if power can be turned on. If still not power, phone HAAN Customer Care. For all other issues and questions, please contact HAAN Customer Care. 1 877-HAAN-DIRECT (1-877-422-6347) 8 One Year Limited Warranty Your HAAN Garment Steamer is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. The included Warranty Registration Card must be filled out and returned within 10 days of purchase. This is essential for your warranty to be effective, should any problem arise with this product. Should any defect covered by the terms of the limited warranty be discovered within one year, HAAN Corporation will repair or replace the...
Dieses Handbuch ist für folgende Modelle:Bügeleisen - Garmet Steamer GS-30 (657.84 kb)