Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
2 USA: 1-800-851-8900 Francais .............................................. 9 Canada : 1-800-267-2826 Espanol .............................................. 17 Mexico: 01 800 71 16 100 Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato. Fer a repasser Plancha 840141100 (Signer's identity unknown) Signed by EAD Time: 2005.09.22 14:02:01 -04'00' Reason: I am approving this document Location: 5.5 X 8.5", English/French/Spanish, 24 pages, saddle stitch, continuous read, black ink, no bleeds 840141100 ENv02.qxd 9/22/05 1:38 PM Page 2 WARNING Shock Hazard • Do not immerse this appliance in water or other liquid. • This appliance has a polarized plug (one wide blade) that reduces the risk of electrical shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or using an adaptor. If the plug does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet. IMPORTANT SAFEGUARDS When using your flatiron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Use iron only for its intended use. 2. To protect against risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to OFF ( O ) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 5. Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. 6. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer assistance number for information on examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used. 7. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. 8. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS Other Consumer Safety Information This product is intended for household Do not iron or vertical steam clothes that are use only. being worn. Do not use vertical steam in the direction of Use the iron on an ironing board. Ironing on people or pets. any other surface may damage that surface. 2 840141100 ENv02.qxd 9/22/05 1:47 PM Page 3 Know Your Iron Parts and Features 1. Power On Light or Automatic Shutoff Reset Button/Light (see inset) 5. Spray Nozzle 6. Water Window 8. Soleplate 9. Heel Rest 10. Cord 2. Spray/Blast Buttons (see inset) 3. Adjustable Steam Switch 4. Water Tank Opening 7. Temperature Control Dial Blast Spray Before First Use • Steam vents should be cleaned before first use. • To clean steam vents before first use, prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. Press the Blast button several times to clean the vents. Then follow the Self-Cleaning instructions. • During the first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. CAUTION Burn Hazard • Metal surfaces on this iron are hot. • Keep hands clear of metal surfaces while operating. 3 1:39 PM Page 4 840141100 ENv02.qxd 9/22/05 Using Your Iron To Dry Iron 1. Plug iron into outlet. 2. Turn Adjustable Steam Switch to Dry Iron . To Steam Iron 3. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. 4. To turn iron OFF ( O ), turn Temperature Control Dial to OFF ( O) and unplug iron. 1. Unplug iron. Turn Adjustable Steam Switch to Dry Iron . Set iron upright on heel rest. 2. Using a cup, slowly pour tap water into water tank opening until MAX fill line has been reached. Do not fill iron directly from the faucet. 3. Plug iron into outlet. 4. Turn the Temperature Control Dial to desired fabric setting in the steam range. 5. Allow two minutes for the iron to reach desired temperature. 6. Set Adjustable Steam Switch to the recommended steam level. See the “Fabric Setting Chart.” 7. To turn iron off, set Adjustable Steam Switch to Dry Iron . Turn the Temperature Control ...