Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
4. Open the battery cover on the back of the keyboard. 5. Insert two AA batteries, and close the battery cover. Connect the Receiver: 1. Turn off the computer before connecting the receiver to your computer. 2. For the best performance, place the receiver at least 8 inches away from computer, monitor, and any other device that may cause radio interference. 3. Working on a metallic surface will reduce the RF performance. Avoid placing the receiver on metallic surfaces. 4. Plugging or unplugging the from the computer’s USB port improperly can cause to the USB ports and to the computer. This RF wireless keyboard and optical mouse uses digital radio technology to communicate. It transmits radio frequency signals that are picked up by the receiver and sent to the computer. The receiver is connected to the computer’s PS2 or USB port via a cable. Connect the PS2 or USB connector to any of the computer’s PS2 or USB ports. Set the ID codes: After installing the batteries and connecting the receiver to the computer, turn on your computer and follow the procedures as below to set the ID code. There is an ID button on the bottom of the mouse, one on the front of the keyboard, and another one on the front side of the receiver (see figures on the next page for the ID button location) . RF Wireless Keyboard Wireless Optical Mouse Receiver 1. Press the ID button on the receiver, and then press the ID button on mouse. After a few seconds, press the ID button on keyboard, then press the ID button on the receiver. The ID code will be set automatically. 2. After the above process, the receiver LED will blink, when you move the mouse, or type on the keyboard. This means that the keyboard and the mouse have communicated with the receiver successfully. 3. If you cannot see the blinking LED when you move the mouse or type on the keyboard, the keyboard/mouse will not work properly. Please re-install the batteries and retry the above set up process. Using the Mouse: After successful installation, the mouse works with Windows ME/2000/XP, without the need of software drivers. The mouse comes with a scrolling wheel, which can function either as a wheel or as a button (see figure on left). 1. To scroll up, move the wheel forward, to scroll down, move the wheel backward. 2. To use the wheel like a standard mouse middle button, simply click (press down) the wheel button. Using the Keyboard: After successful installation, the Keyboard can work well with Windows Vista/XP/2000/ME without the need of software drivers. The keyboard is a 107/5-key model and also includes 16 hot keys to enable one touch access to multimedia/internet functions. HOT KEY FUNCTIONS Function Name Function Description Launches the default Home Internet browser in your system. E-Mail Compose an e-mail using the default mail client. Search Browse your computer for files or folders Backward Go back to your previously viewed web page when viewing the Internet Foward Go to the next viewed web page when viewing the Internet Mute & Un-Mute the Mute audio. Previous Allows you to go back to the previous track when playing a CD/DVD Next Allows you to go to the next track when playing a CD/DVD Decreases the Volume volume of the current audio. Increases the volume Volume + of the current audio. Stop Stops the audio/video file currently being played. Play/Pause Plays/Pauses your video or audio media. Favorites Launches your favorite web page directory. My Computer Opens up My Computer Calculator Opens up your Windows Calculator Power Turns off your PC TROUBLESHOOTING o If your keyboard/mouse does not work after installation, please check following: • Make sure you have connected the receiver correctly to the computer. The receiver connection has been properly plugged onto computers USB port. • Make sure you have inserted the batteries correctly. • Make sure you have set the ID codes properly, as stated above. • For better performance, place the receiver at least 20 cm (8inches) away from computer, monitor, or other devices cause radio interference. Avoid placing the receiver on metallic surface. • If without any interference (for example the other computer peripherals), the working distance of the keyboard/mouse, i. e. the distance between the keyboard/mouse and the receiver, is about 5 feet. o If the mouse cursor does not move properly, or the keyboard does not allow you to type on the screen, please check the following. • Check the position of your receiver. Maybe the receiver is to far away. • Check the large metal devices, such as microwave, electric stove, television, hair dryer, which may interfere with the receiver’s radio reception. • Check the status of the batteries. Warning: When the low battery indicator flashes this means it is time to replace the batteries. Important: The mouse will go into power saving mode after 8 min. without being used. To wake up the mouse, users need to click either button on the mouse. REQUIREMENTS • Plug n Play with Windows Vista, XP, 2000, a...