Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Adesso Dateigröße: 449.19 kb Dateiname: 31843fa8-c3f5-9234-ed84-3d548d290a0b.pdf Unterrichtssprache:

Standard keyboard keys are functional. TABLE OF CONTENTS Full-Size Keyboard ..............................................................1 Setting Up and Synchronizing ............................................ 1 Determining the Channel................................................... 3 Changing the Channel.......................................................4 Powering On and Off ........................................................ 4 Special Keyboard Media Keys.............................................5 Keyboard Usage Tips ........................................................ 6 RF Receiver .........................................................................8 Learn Button ................................................................... 8 Status Light..................................................................... 8 Keyboard LEDs ................................................................ 9 Installing 3 or More Devices............................................... 9 Troubleshooting Tips.........................................................11 Regulatory Information.....................................................12 FCC Statement .............................................................. 12 Canadian Radio Interference Regulations........................... 13 Contacting Gyration...........................................................14 i Gyration Full-Size Keyboard Ergonomically-designed, the Full-Size Keyboard has a sleek, refined look with an exceptional feel. Due to Gyration’s powerful radio frequency technology, this keyboard is ideal for your desk, the office conference room, and even your home office. Setting Up and Synchronizing the Keyboard and the Gyration RF Receiver When installing the Full-Size Keyboard for the first time or when adding additional Gyration devices to the system, it is necessary to perform a Teach/Learn sequence to synchronize the devices. To set up and synchronize the Full-Size Keyboard and the RF Receiver: 1. Connect the receiver cable into an available USB port and power on your computer. Your operating system should detect the new hardware device and initiate the installation procedure. Continue to follow the standard USB device installation screens until installation is complete. 1 2. Insert four AA batteries into the keyboard. 3. Press and hold the Learn button on the receiver for two seconds, and then release it. The Status light will blink slowly, indicating the receiver is in “Learn Mode.” 4. Press and release the Teach button located on the back of the keyboard (see below). The Status light on the receiver will blink rapidly for four seconds, then begin to blink slowly. Note: At this time, press the Teach button on any additional devices (such as a second keyboard, an Ultra Mouse, or a GyroRemote). 5. To exit Learn Mode, press the Learn button on the receiver for two seconds. Otherwise, Learn Mode will automatically time out after five minutes. If more than one Gyration device is being installed on the same system, place the receiver into Learn Mode (step 3 2 above) and then press the Teach button on each device before exiting Learn Mode. However, do not press the Learn button on the receiver for each device to be added (see “Installing 3 or More Devices” on page 9). When the receiver is put into Learn Mode, it erases its memory of previously learned devices and looks for new devices. Therefore when adding a new device to a system, it is necessary to put the receiver into Learn Mode and then press the Teach button on all the devices that will be used on the system. After the Teach/Learn sequence is performed, the receiver and device(s) will remain synchronized after powering down and/or changing channels. It is only necessary to perform the Teach/Learn sequence when setting a device up for the first time or when adding additional devices to the system. Determining Which Channel the Keyboard is Using The Full-Size Keyboard has eight individual channels available to it. To determine which channel a device is currently using: 1. Press and quickly release the Channel button on the back of the keyboard. 2. Count the number of times the green LED light on the front (or back) of the keyboard flashes. The number of flashes indicates the channel the keyboard is using. Note: If the keyboard’s channel is changed when the computer is powered down or the receiver is not connected, the devices will become unsynchronized. When the system is running, click and release the Channel button as described above to confirm the channel. The keyboard broadcasts a message across all eight channels that informs the receiver what channel it is currently operating on. The receiver then automatically restores synchronization. 3 Changing the Channel the Keyboard is Using When two devices are being used in the same proximity, each device should be set to operate on a unique channel. For the best reception, space the channels apart by one or more channels. ...

Herunterladen

Geben Sie zwei Ziffern: