Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Belkin Dateigröße: 2.83 mb Dateiname: Unterrichtssprache:

6 5___5 • Make sure you have properly installed the batteries. Test the batteries to make 7 sure they are not dead (you can do this by installing them into another device). • You may have other system devices that are conflicting with the Mouse and/or the Keyboard. Check the IRQ/address setting of these devices for conflicts and change the settings as required. Please refer to your computer documentation or the manufacturer’s technical support for assistance in making these changes. 7 Troubleshooting 1 • Make sure you have properly established 2 ___ communication/ synchronization between the receiver and the Mouse and Keyboard. 3 ___ • If the Keyboard and/or Mouse are not working, make sure that the LED on the Keyboard and/or 4 Mouse start flashing when you push any of the Keyboard keys, Mouse buttons, or move the Mouse. If the LED does not flash, check to make sure you have installed the batteries correctly. 5___5 6 • When the Keyboard or Mouse LEDs are flashing, the LED on the receiver should also flash to 7 indicate they are speaking to each other. If the LED on the receiver does not flash, it means that the devices have not connected properly. Repeat step 4 to 7 of the quick installation guide. • If your Mouse pointer becomes choppy on- screen or the Keyboard does not register keystrokes, replace batteries with a fresh set. • If your Cursor is controlled by another system in an office or multi-user environment, try to unload the batteries, insert them again after 2 minutes and repeat step 3 to step 7 of the quick installation guide. 8 Uninstallation Process For Windows 98SE, ME, 2000, and XP 1. Select “Setting”. 2. Select “Control Panel”. 3. Select “Add/Remove Programs”. 4. Select “Belkin Wireless Driver,” then click on “Add Remove”. 5. You will be asked if you are sure if you want to remove the selected application and all of its ___ components. Click on “Yes”. ___ 6 The uninstall process will begin. Follow the on-screen instructions to complete the process. 9 Information 1 FCC Statement ___ 2 ___ DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY 3 ___ We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: 4 ___ 5 ___ to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. F8E883-BNDL 6 CE Declaration of Conformity ___ We, Belkin Corporation, declare under our sole responsibility, that the F8E883-BNDL to which this declaration relates, is in conformity with EN55022, EN61000-3-2, EN61000-3-3, and EN55024. Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8inches) during normal operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 77 10 Information Modifications 1 The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Components may void the users 2 authority to operate the equipment. Belkin Corporation Limited Lifetime Product Warranty 3 Belkin Corporation warrants this product against defects in materials and ___ workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product atno charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin 4 dealer from whom you purchased the product...

Herunterladen

Geben Sie zwei Ziffern: