Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colours. Read this manual carefully before starting and keep the manual in a handy place for future reference. • Use only Brother M tapes with this machine. Do not use tapes that do not have the mark. • Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth. • Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when cleaning the print head. • To avoid injuries, do not touch the cutter's edge. • To prevent damage or breakage of the LCD glass, do not press on the display. • Do not put any foreign objects into or heavy objects on the machine. • Do not leave any rubber or vinyl on the machine for an extended period of time, otherwise the machine may be stained. • Do not get the machine wet, such as by handling it with wet hands or spilling beverages on it. • Do not expose the machine to extremely high temperatures or high humidity. Never leave it on the dashboard, in the back of your car, near heaters or other hot appliances. Keep it out of both direct sunlight and rain. • Avoid using the machine in extremely dusty places. • Depending on the environmental conditions and the applied settings, some characters or symbols may be difficult to read. • Do not pull on the tape being fed from the P-touch, otherwise the tape cassette or P-touch may be damaged. • Do not attempt to cut the tape while printing or feeding since this will damage the tape. • Do not try to print labels using an empty tape cassette set in the P-touch. Doing so will damage the print head. • Remove the batteries if you do not intend to use the machine for an extended period of time. (Note: When no power is supplied for more than two minutes, all text and format settings will be cleared. Language and clock settings will also be cleared.) • Be sure to turn off the machine before replacing the batteries or the tape cassette. • Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. Otherwise the batteries may have leakage or fracture. INTRODUCTION GENERAL PRECAUTIONS Power Supply & Tape Cassettes Remove the back cover by pressing in the rough area at the top end of the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. • Be sure to turn off the machine before replacing the batteries or the tape cassette. Insert four new AAA-size alkaline batteries (LR03), making sure that their poles point in the correct directions. Always replace all four batteries at the same time using brand new ones. Insert a tape cassette, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • Use only Brother M tapes with this machine. Attach the back cover by inserting the two hooks at the bottom into the slots on the machine, then pushing down firmly on the cover until it snaps into place. • After you have installed the tape, feed the tape ( + ) once and then push in the tape cutter lever to cut the tape. Print head Tape guide End of tape Cutter's edge Tape exit slot Tape cutter lever Keyboard & LCD Initial Setting Start your machine Provide power by installing four AAA batteries, and then press . Set your language (Language options depend on the country of purchase.) Choose a language with and press . Set Date (DD/MM/YY) and Time (hh:mm) Example: setting the clock to 20th March 2006, 15:30 You can also confirm the current setting and continue to the next setting by pressing the right cursor key. • The LCD shows one row of 12 characters; however, the text that you enter can be up to 80 characters in length, which will scroll across the display. • Use Cursor key while holding down Shift key to go to beginning / end of the text. Date (DD/MM/YY) > > input “20” input “03” input “06” Time (hh:mm) > input “15” input “30” • The machine automatically turns off if no key is pressed within 5 minutes. • To cancel operations, press . • To return the P-touch to its factory settings, turn it off, and then while holding down and , press to turn the machine back on. Finally, release and . Fn Time/Date Shift Shift Caps Num Symbol Space Accent Q W E R T Y U I O P A S D F G H J K L / Z X C V B N M , - . ' Size Cursor Caps Power key Shift key Caps key Num Lock key Symbol key Width Style Underline/Frame Label Length Cursor key Enter key Shift key Accent key Space key Num Lock Print key Preview key Function key Time/Date key Backspace key Character keys Troubleshooting Error message What to do when... Specifications Message Cause/Remedy Battery The batteries are weak. Replace them with new ones. Invalid An invalid number was specified as the Label Length setting. No Text • The Print key or Preview key is pressed when no text has been entered. • A Copies (copy printing) setting was being ...