Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
HP StorageWorks
MSL4048 tape library desktop conversion
CAUTION! Parts can be damaged by electrostatic
discharge. Ensure you are properly grounded
when touching static sensitive components.
1 Choose a location
2 Unpack the tape library
Select a location for your tape library that has
and library cover
adequate clearance for ventilation, has minimal dust
and debris exposure, has an appropriate power source,
Clear a work surface to install the library cover. Unpack
and is near the host server. Select a flat, sturdy and
the library and place it on the work surface with the top
level surface. Do not place the tape library on its side
facing up. Carefully remove the library cover from the
or stack items on top of the library.
shipping container and place it on the work surface.
3 Remove and store the
shipping lock
NOTE: This step is normally done when the
library is first unpacked. If this is not an initial
installation, the shipping lock may have already
been removed and stored.
Locate the tape holding the lock at the top of the library.
Remove the tape, then remove the lock and store it as
shown.
...Dieses Handbuch ist für folgende Modelle:
Media Storage - HP MSL Tape Library (135.6 kb)
Media Storage - HP MSL2024 0-Drive Tape Library (135.6 kb)
Media Storage - HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library (135.6 kb)
Media Storage - HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library (135.6 kb)