Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
ESL
hp
E-Series
StorageWorks
Cluster
Controller
Caution: Parts can be damaged by
Note: This part is not hot-pluggable. It is
electrostatic discharge. Keep parts in their
necessary to power down the library to
containers until needed. Ensure you are
replace this part.
properly grounded when touching static-
sensitive components.
1
2
ESL
E-series
hp
Cluster
Controller
StorageWorks
Power off the library.
Note: This part is not hot-pluggable. It is
not necessary to power down the library to
replace this part.
Caution: Parts can be damaged by
electrostatic discharge. Keep parts in their
a. Use your backup software to empty the picker
containers until needed. Ensure you are
properly grounded when touching static-
sensitive components.
2
or to verify that the picker is empty.
Power down the library.
a. Place the library off-line by pressing the
1
Standby button on the library's front panel.
The library robotics completes any current
commands and then stops.
E
SL
E
-
s
eries
C
luster
b. Verify that the front panel display indicates
b. Place the library off-line by pressing the
C
ontrol er
h
p
N
ote: This part is not hot-pluggable. It is
n
ot necessary to power down the library to
S
t
orageWorks
r
e
place this part.
“System Off-line”.
C
aution: Parts can be damaged by
e
l
ectrostatic discharge. Keep parts in their
c. Verify that the picker is empty. If there is a
c
o
ntainers until needed. Ensure you are
p
roperly grounded when touching static-
2
s
e
nsitive components.
Po
wer down the library.
a. Place the library off-line by pressing the
S
t
andby button on the library's front panel.
tape cartridge in the picker, perform a Move
T
h
e library robotics completes any current
c
ommands and then stops.
b
.
Verify that the front panel display indicates
“
S
ystem Off-line”.
1
c
.
Verify that the picker is empty. If there is a
t
ape cartridge in the picker, perform a Move
command to place the cartridge in an
c
o
mmand to place the cartridge in an
a
vailable slot. [Content needed.]
d
.
Press and hold the power button located on
th
e front of the library behind the laptop tray
u
ntil the front panel goes blank.
available slot. [Content needed.]
4
d. Press and hold the power button located on
Standby button on the library's front panel.
In
s
pect the contents of the kit.
the front of the library behind the laptop tray
3
F
li
p the two breaker switches off at the power
until the front panel goes blank.
d
i
s
tribution unit.
O
pen the back door of the library.
Inspect the contents of the kit.
4
c. Verify that the front panel display indicates
3
“System Off-line”.
d. Press and hold the power button, located on
Flip the two breaker switches off at the power
distribution unit.
the front of the library behind the laptop tray,
Open the back door of the library.
until the front panel goes blank.
Inspect the contents of the kit.
3
4
Flip the two breaker switches off (to the left) at the
Open the back door of the library.
power distribution unit.
...Dieses Handbuch ist für folgende Modelle:
Media Storage - HP ESL 712e Ultrium Tape Library (716.53 kb)
Media Storage - HP StorageWorks ESL 286e 286 Slot SDLT Library (716.53 kb)
Media Storage - HP StorageWorks ESL 286e SDLT Tape Library (716.53 kb)
Media Storage - HP StorageWorks ESL 322e 322 Slot Ultrium Library (716.53 kb)