3. Read the HP EULA, and either click Agree to
Software installation instructions
start the software instal ation or click Disagree to
cancel the installation.
Use the HP SAN Connection Manager CD to install
The installation options window (Figure 3)
the management software on your management
opens.
station as described in SAN Connection Manager
Figure 3 Installation wizard: options
installation, page 4. Use the same CD to install the
(Management Instal ation selected)
HBA driver and other required software on each of
the other servers in your SAN that use QLogic FC
HBAs. Depending on the server operating system for
the non-management station instal ations, follow
either the Non-management station Windows
installation, page 6 or the Non-management station
Linux instal ation, page 7 instructions. For
configuration of servers using non-QLogic HBAs or
other operating systems, refer to the HP SAN
Connection Manager User Guide.
IMPORTANT: SAN Connection Manager
version 2.10 or later can manage HP 8/20q
Fibre Channel Switches with active TR_Ports;
however, SAN Connection Manager cannot
manage or discover remote switches or devices
4. To install all of the components required for a
in the remote fabric. The Physical Connection
management station with both EVA and MSA
map displays the remote fabric as a grayed-out
storage, select the Management Installation
switch, but SAN Connection Manager cannot
option. In addition, you can select one or both
manage the switch. To present logical unit
of the following optional components:
numbers (LUNs) to remote devices, use
•
HP SAN Designer provides quick and easy
QuickTools and the storage management
ways to design SANs based on your
interface.
specific performance, cost, and future
SAN Connection Manager version 2.00 and
storage needs. The tool generates a SAN
earlier does not support the management of
topology diagram, a detailed list of
fabrics that include 8/20q Fibre Channel
required SAN components, as well as
Switches with active TR_Ports, and may disrupt
recommendations for planning your future
communication between the 8/20q Fibre
growth requirements.
Channel Switch and the remote fabric. If you
•
HP SAN Visibility is a SAN data analysis
intend to manage the SAN using SAN
tool that securely analyzes your SAN
Connection Manager, be sure you are using
configuration, providing an automated
version 2.10 or later.
inventory process for switches, HBAs, and
storage systems, including firmware version
SAN Connection Manager installation
verification.
To install the SAN Connection Manager software on
your management station:
1.
Insert the installation CD into the CD-ROM drive
of the server.
The HP Installation Wizard starts automatically,
and the initial installation window opens. (If the
installer does not start automatically, run
Setup.exe from the installation CD.)
2.
Click Next.
The End User License Agreement (EULA) is
displayed.
Page 4

---

...

Dieses Handbuch ist für folgende Modelle:
Media Storage - HP 8/20q Fibre Channel Switch/S-Buy (1.34 mb)
Media Storage - HP 8Gb Simple SAN Connection Kit (1.34 mb)
Media Storage - HP 8/20q Fibre Channel Switch (1.34 mb)
Media Storage - HP 8Gb Simple SAN Connection Kit/S-Buy (1.34 mb)