Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: HP
Dateigröße: 899.63 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Document Outline
- Hewlett-Packard SureStore E SCSI Bridge FC 4/2
- 1 Product Description
- Figure 1 SureStore E SCSI Bridge FC 4/2 Front Panel
- Figure 2 SureStore E SCSI Bridge FC 4/2 Back Panel
- Figure 3 Two-Node Loop Topology with Tape Library Peripherals
- Figure 4 Two-Node Loop Topology with a Hub and Tape Library Peripherals
- Figure 5 Two-Node Loop Topology with Disk Device Peripherals
- Figure 6 How the SSB Processes SCSI Information
- 2 Installation
- Figure 7 SSB Installation Overview
- 1. Remove the items from the HP shipping container. Check each one for damage. If any item is mis...
- 2. Refer to Standard Configuration on page162 and HP A3308A, HP A3511A, and HP A3511AZ Configura...
- 3. Select a location where the SSB can be disconnected easily from an accessible power outlet and...
- 4. Do not connect any cables between the SSB, host, or devices until the SSB is tested.
- 1. Plug in the power cord. Open the door on the front panel. Press
. The SSB automatically... - 2. If the LCD displays letters and numbers, as shown in the example below, continue to the next s...
- 3. Inspect the Slot Status Screen for the correct number of FC and SCSI adapters. For example, if...
- 4. If an error message appears on the screen, see Viewing the Error Log on page89 and Error (ERR...
- 5. View the FC loop address and verify that no other device on the loop has the same address. Res...
- 6. Power off the SSB when finished.
- 1. To determine the operating system (OS) version, type the following command:
- 2. (A system manager or HP-qualified service person should perform this step.) To verify if the S...
- 3. Select Kernel Configuration from the SAM main window.
- 4. Select Drivers.
- 5. If any driver is missing, install it. Refer to the ...Dieses Handbuch ist für folgende Modelle:
Media Storage - HP Surestore Bridge fc 2/1 lv (899.63 kb)
Media Storage - HP Surestore Bridge fc 4/1 hv (899.63 kb)
Media Storage - HP Surestore Bridge fc 4/2 (899.63 kb)