Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
HP StorageWorks
About this document
The chassis field replacement unit (FRU) replaces a chassis that has
2000 Family Modular Smart
been damaged or whose midplane has been damaged. To make a
fully functional chassis, you must install the following components
Array
from the replaced (damaged) chassis:
• All drive modules and air management modules
chassis and midplane
• Two power supply modules
replacement instructions
• One or two controller modules (for a controller enclosure)
• One or two I/O modules (for a drive enclosure)
This document details procedures for removing drive modules/air
management modules, power supply modules, controller modules,
and I/O modules from the failed chassis and installing them into the
replacement chassis of an HP StorageWorks 2000 Family Modular
Smart Array.
NOTE: Make sure you obtain the latest version of these
instructions from http://www.hp.com/go/msa. Select MSA SAN
Arrays, select your product, and go to Support.
Before you begin
• Turn the power supply modules off and disconnect the power
cables.
• Disconnect and label all cables.
CAUTION: Parts can be damaged by electrostatic discharge.
Use proper anti-static protection:
• Keep the replacement component in the ESD bag until needed.
• Wear an ESD wrist strap grounded to an unpainted surface of
the chassis.
• If an ESD wrist strap is unavailable, touch an unpainted surface
of the chassis before handling the component.
Printed on at least 50% total recycled fiber with at least 10%
post-consumer paper
• Never touch connector pins.
© Copyright 2008 Hewlet -Packard Development Company, L.P.
Removing air management and drive
First edition: November, 2008
Product names mentioned herein may be trademarks of their
modules
respective companies as reflected by an associated footnote. The
information in this document is subject to change without notice.
2.5-inch air management modules
Printed in China.
1. Squeeze the top and bottom latch release but ons to disengage
www.hp.com
the module, and pull the module straight out of the enclosure.
508267-001
Page 1
...