•
Be sure that the partner server blade is powered down before
CAUTION: To prevent improper cooling and thermal
installing the D2220sb.
damage, do not operate the D2220sb or the enclosure
HP D2220sb Storage Blade
Overview
Onboard Administrator is used to configure the enclosure and the
unless al device bays and the first three drive bays are
Instal ation of a D2220sb requires the fol owing steps:
D2220sb. To function with the D2220sb, Onboard Administrator
populated with either a component or a blank.
Installation Instructions

1. Instal and configure an HP BladeSystem c-Class enclosure.
version 3.60 or later is required.


CAUTION: Thermal regulation is maintained only when

2. Instal any D2220sb options.
Additional guidelines for installation with a
the drive drawer is closed. The drive drawer open alarm is


triggered under the following conditions:

3. Install the D2220sb.

half-height partner server blade
4. Instal the partner server blade.
• A slow beep and flash (1 every 5 seconds) indicate
that the drive drawer is open. The drives are not ful y
For definitions of the acronyms used in this document, see "Acronyms
When installing the D2220sb with a half-height server blade, observe
protected by system air flow.
and abbreviations" in the storage blade user guide.
the following additional guidelines:
• A fast beep and flash (2 per second)—To avoid drive

•
Install the D2220sb in any device bay.
damage or data loss and storage blade shutdown,
Kit contents
•
If the D2220sb is instal ed in an odd-numbered bay, instal the
close the drive drawer immediately.
partner server blade in the adjacent even-numbered bay to the
When the drives reach critical temperatures, the system
When unpacking the HP D2220sb Storage Blade, locate the following
right.
shuts down.
items:

•
If the D2220sb is instal ed in an even-numbered bay, instal the
1. Open the drive drawer.
•


HP D2220sb Storage Blade
partner server blade in the adjacent odd-numbered bay to the

•
Half-height blade shelf
left.
IMPORTANT: The drive drawer is not fully extended until


the rail lock is engaged. To engage the rail lock, extend
•
Documentation kit
the drive drawer approximately 2.54 cm (1 inch) past the

Additional guidelines for installation with a
initial resistance.
Installing an HP BladeSystem
full-height partner server blade

c-Class enclosure
When instal ing the D2220sb with a ful -height server blade, observe
the following additional guidelines:
Before performing any procedures specific to the D2220sb, instal an
•
Remove the device bay shelf.
HP BladeSystem c-Class enclosure.

CAUTION: Failure to instal the divider in a quadrant
The most current documentation for HP BladeSystem components is
when installing half-height blades can result in damage to
available at the HP Business Support Center website
the connectors on the server blades.
(http://www.hp.com/go/bizsupport).

•
Install the half-height blade shelf on the D2220sb.
Documentation is also available in the following locations:
•
Install the D2220sb in any device bay on the lower row of the
•
Documentation CD that ships with the enclosure
enclosure (9 through 16).
•
HP technical support website (http://www.hp.com/support)
If installing two D2220sb storage blades with one full-height

partner server blade, instal the second D2220sb in the bay
Half-height device bay numbering
directly above the first one. The top D2220sb does not require a
half-height blade shelf.

If installing two D2220sb storage blades with one partner server
2. Remove the drive blanks as needed.

blade in an HP BladeSystem c3000 Enclosure, use the mini
CAUTION: To prevent improper cooling and thermal
divider instead of the half-height blade shelf. For more
damage, do not operate the D2220sb or the enclosure
information, see the HP BladeSystem c3000 Enclosure Quick
unless al device bays and the first three drive bays are
Setup Instructions.
populated with either a component or a blank.
•
If the D2220sb is instal ed in an odd-numbered bay, instal the

partner server blade in the adjacent even-numbered bay to the
right.
•
If the D2220sb is instal ed in an even-numbered bay, instal the
© Copyright 2012 Hewlett-Packard Development Company, L.P.
partner server blade in the adjacent odd-numbered bay to the
The information contained herein is subject to change without notice. The only
left.
warranties for HP products and services are set forth in the express warranty
•
When instal ing the D2220sb with a ful -height server blade, a
statements accompanying such products and services. Nothing herein should
half-height server blade can be installed in the empty bay above

be construed as constituting an additional warranty. HP shal not be liable for
the D2220sb. This server blade cannot be partnered with the
technical or editorial errors or omissions contained herein.


D2220sb.

Installation guidelines
Installing a storage blade
Part Number: 714239-001
When instal ing the D2220sb, observe the fol owing guidelines:

December 2012
*714239-001*
Edition: 1
714239-001
•
Instal drives in the D2220sb before instal ing the D2220sb in the
enclosure.

---

...

Dieses Handbuch ist für folgende Modelle:
Media Storage - HP D2220sb Configure-to-order Storage Blade (541.32 kb)
Media Storage - HP D2220sb PCIe and StoreVirtual VSA Bundle (541.32 kb)
Media Storage - HP D2220sb PCIe w/(12) 900 GB 6G SAS HDD Bundle (541.32 kb)
Media Storage - HP D2220sb Storage Blade Bundle with SAAP License (541.32 kb)