Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
• Make sure the power source (battery pack or AC Adaptor) is connected correctly (p. 13). • Moisture condensation has occurred inside the VCR (p. 84). The Cassette Memory indicator or title display does not appear while using a cassette tape with Cassette Memory. • This VCR does not support Cassette Memory, so the indicator does not appear. The remaining tape indicator is not displayed. • Set [ REMAINING] to [ON] to always display the remaining tape indicator (p. 64). Troubleshooting Continued , 67 Troubleshooting (Continued) Troubleshooting (Continued) • You cannot delete the recorded picture on the tape. You can only rewind the tape and record again. The new recording overwrites the existing one. You cannot delete any or all still images at once stored on the “Memory Stick Duo” media. • The still images are protected. Release the protect function on your computer, etc. You cannot record on the “Memory Stick Duo” media. • The “Memory Stick Duo” media is full. Delete unnecessary still images recorded on the “Memory Stick Duo” media (p. 50). • Format the “Memory Stick Duo” media on the VCR (p. 63) or insert another “Memory Stick Duo” media (p. 20). Playback Refer also to the Cassette tapes/“Memory Stick Duo” media section (p. 67). You cannot play back tape. • Set the POWER switch to ON. • Rewind the tape (p. 22). • Eject the tape and insert it again (p. 19) Image data stored on a “Memory Stick Duo” media cannot be played back correctly. • Image data cannot be played back if you have modified file names or folders, or if you have edited the data on a computer (In this case, the file name flashes). This is not a malfunction (p. 81). • Still images recorded by other devices may not be played back in actual size or displayed correctly. This is not a malfunction. The data file name is displayed incorrectly, or flashing. • The file is damaged. • The file format is not supported on the VCR (p. 80). Horizontal lines appear on the picture. The displayed pictures are not clear or do not appear. • Video head is dirty. Clean the head using the cleaning cassette (optional) (p. 85). You cannot hear the sound recorded with 4CH MIC REC on another device. • Set [DV AUDIO MIX] (p. 61). No sound or only a low sound is heard. • Turn up the volume (p. 21). • Set [MULTI-SOUND] to [STEREO] (p. 61). • Set [DV AUDIO MIX] (p. 61). • When you are using an S VIDEO plug or component video cable, make sure the red and white plugs of the A/V connecting cable are also connected (p. 26). The picture or sound breaks off. The picture or sound breaks off. The tape was recorded in both of the HDV and DV formats. This is not a malfunction. The movies freeze for a while, or the sound breaks off. • This occurs if the tape or video head is dirty (p. 85). • Use the Sony mini DV cassette. “-:--:--:--” is displayed on the screen. • The tape you are playing was recorded without setting the date and time. • A blank section on the tape is being played back. • The data code on a tape with a scratch or noise cannot be read. Noises appear and or is displayed on the screen (GV-HD700/1). • The tape was recorded in a TV color system other than that of the VCR (NTSC) (p. 78). This is not a malfunction. Noises appear and or is displayed on the screen (GVHD700E/ 1). • The tape was recorded in a TV color system other than that of the VCR (PAL) (p. 78). This is not a malfunction. Date search does not work correctly. • Make sure to record more than 2 minutes after the date changed. If one day’s recording is too short, the VCR may not accurately find the point where the recording date changes. • There is a blank section between recorded sections of the tape. This is not a malfunction. End search does not work. • Do not eject the cassette after recording (p. 33). • Nothing is recorded on the tape before performing end search after inserting the tape. • There is a blank section between recorded sections of the tape. This is not a malfunction. No picture appears during End search. • The tape was recorded in both of the HDV and DV formats. This is not a malfunction. New sound added to a recorded tape on another device is not heard. • Adjust [DV AUDIO MIX] from [ST1] (original sound) side until the sound is heard appropriately (p. 61). appears on the screen. • This appears when you play back a tape recorded on other recording devices using a 4ch microphone (4CH MIC REC). This VCR does not comply with the 4ch microphone recording standard. Recording The recording does not start when you press REC. • Set the POWER switch to ON (p. 18). • The tape has reached the end. Rewind it, or insert a new cassette. • Set the write-protect tab of the cassette to REC or insert a new cassette (p. 79). • The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave the VCR for at least 1 hour, then re-insert the cassette (p. 84). Troubleshooting Continued , 69 Troubleshooting (Continued) Troubleshooting (Continued) You cannot view the picture on the TV connected...