Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Installation 2. Installation 2.1. System Requirements • Intel Pentium® 4 1.8GHz (or higher) processor (For the time-shifting function, Pentium® 4 2.4GHz (or higher) processor is recommended.) • One free USB port • 256 MB of system memory ( 512 MB or more is recommended) • Graphics card (supporting Microsoft® DirectX® 9.0 or above) • Sound card • CD-ROM or DVD-ROM player • 1 GB of free hard disk space is recommended for the time-shifting function • Windows® XP Service Pack 1 or above • Microsoft® DirectX® 9.0 or above 2.2. Package Contents USB 2.0 Hybrid TV Dongle DVB-T Antenna Auxiliary USB Cable GIGABYTE GIGABYTE English Remote Control TV Signal Adaptor x 2 Installation CD User's Manual (Battery included) -3 - Installation English 2.3. Hardware Installation Connect the GT-U8000-RH hybrid TV dongle to your system and television, as shown below: USB Cable TV Signal Adapter Digital TV Antenna USB TV Dongle Desktop SystemTV Signal Adapter Analog Signal Source Notebook When you want to receive the Digital TV, please set up the digital TV antenna in a location where the signal reception is good. GT-U8000-RH USB 2.0 Hybrid TV Dongle - 4 2.4. Software Installation Software installations in the Windows® XP and Windows® XP MCE system are different. Refer to the following directions for software installation: Software Installation in Windows® XP Follow the on-screen instructions to easily complete the software installation. Please execute the Install TV card driver, Install TV Player, and Install Remote control driver items in sequence, as listed in the autorun window. Then, restart the system and open the TV player--PowerCinema. Software Installation in Windows® XP MCE Please execute the Install TV card driver item. After restarting the system, you can enjoy the multimedia functions on the MCE platform. In addition, you can also execute the Install TV Player and Install Remote control driver items to use the TV player--PowerCinema to watch TV. Remote Control Guide Almost all functions can be easily activated by using the up, down, left, right triangle buttons and the OK and Back buttons. Blue buttons are instant activation buttons. (Note: The GT-U8000-RH does not support FM radio function. The FM radio function can not be activated by using either the blue FM button or software.) English The remote control is for GIGABYTE's bundled TV player only. For the multimedia platform in Windows® XP MCE, you need to buy a MCE-certificated remote control. -5 -Installation English 3. Advanced Features 1. Good reception quality in high mobility GIGABYTE GT-U8000-RH hybird TV dongle is equipped with a chip designed by Dibcom--a professional car TV IC design house, so it has good digital TV reception while moving at high speed (90km/h ~ 110km/h, depending on the quality of the signal source). It is easy to enjoy TV with the GT-U8000-RH when you are in a moving vehicle. 2. Time-Shifting function When the time-shifting function is activated, the system will record the live TV program in your hard disk. (The system will reserve the recorded program for up to 30 minutes). Then, you can pause, forward or backward the channel you are watching. If you switch to another channel, the system will erase the previously recorded contents and start to record the current channel. The time-shifting function is defaulted to off when the TV player is installed. Please go to [TV] > [Settings]> [Signal Settings] and enable the [Time-Shifting] function if you want to activate this function. Besides, because the time-shifting function needs more system resources, please confirm whether your system meets the recommended system requirements. 3. Scheduled recording In the TV or Radio menu, click [Schedule] and select [TV] or [Radio] program to record. Click [New Schedule] to set up the schedule record. Besides, if the TV channel supports the EPG function, you can click the program in the EPG menu to record without setting recording details. 4. EPG function Some TV channels provide Electronic Program Guide function. You can check this by clicking the EPG button on the remote control. Then the screen will show the TV program guide. Moreover, you can directly click the program that you wish to record without setting record details. 5. SAP/Stereo sound function Please enter [TV]> [Settings]> [Signal settings]> [Audio] to choose SAP or Stereo sound. This function can be activated only when the corresponding channel supports this function. GT-U8000-RH USB 2.0 Hybrid TV Dongle - 6 1. 1. 1.1. • (NTSC / PAL / SECAM) • (DVB-T) • • CyberLink PowerCinema • • USB 2.0 • • • Teletext EPG • • • • mpg dat avi • Windows® XP MCE • ( ) - 1 2. 2. 2.1. • Pentium® 4 1.8G ( Pentium® 4 2.4 G ) • USB • 256 MB ( 512 MB ) .. ( Microsoft® DirectX® 9.0 ) • • CD-ROM DVD-ROM • 1 GB • Windows® XP Service Pack 1 • Microsoft® DirectX® 9.0 2.2. USB 2.0 USB GIGABYTE GIGABYTE ( ) x 2 GT-U8000-RH USB 2.0 - 2 2.3. GT-U7000-RH ( ) USB - 3 2.4. Windows® XP Windows® XP MCE Windows® XP " " " " " " ...