Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Anleitung Ozark Trail, modell WMT-9920N

Hersteller: Ozark Trail
Dateigröße: 133.61 kb
Dateiname: ebbc9baa-f2d5-4d94-b29a-d913326ff378.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


x 48in. QTY. DESCRIPTION PART NUMBER FABRIC BODY: ___ 1 Dome Tent Body POLES: ___ 2 Fiberglass, shock-corded Tent Pole- black; ___ 1 Fiberglass, shock-corded Cross Pole- orange; ___ 1 Fiberglass, shock-corded Rainfly Pole - black; If you wish to order a complete set of poles, please use: ___ 1 Pole Set of Four shock-corded Fiberglass Poles- orange/black RAINFLY: ___ 1 Rainfly w/ 6 S-Hooks; orange/grey CARRY BAG: ___ 1 Carry Bag- orange/grey; UNIVERSAL PARTS: ___ 1 Gear Loft ___ 1 Pole bag ___ 1 Stake Bag STAKES: ___ 1 Stake Set of Eight 7 in. steel stakes N/A TPOL-428BK CPOL-392OR FPOL-187BK PSET-ORBK RFLY-ORGY08 CBAG-660ORGY GEAR-20TRI PBAG-27IN SBAG-9IN SSET-8ST7IN Review your parts list above to make sure all parts listed above have been included in your package. Please do NOT return product to store. ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS THIS RECREATIONAL PRODUCT REQUIRES TWO PEOPLE TO ASSEMBLE. Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent. * Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the * next section before flexing the pole during set-up. Sort POLES by type and length; refer to parts list descriptions. Do not drop tent bag or pole bag. Do not bounce tent bag on its end to remove tent, as these actions may damage the shock-cord * and/or pole ends. STEP 1: Verify Package Contents Verify package contents by emptying contents of bag(s) and confirming all parts are included and undamaged. Tip: Do this at home before you leave on your trip. STEP 2: Set Up the Tent A) Select a smooth level site and spread out your tent. B) Extend the tent poles and place in position ready for installation. Push each of the three tent poles through pole sleeves, orange pole will go to the orange pole sleeve. C) After sliding poles through sleeves, gently flex poles into an arch and insert ends onto pin-rings at tent base. D) Snap Quick Clips (attached to tent body) onto tent poles to shape tent. STEP 3: Attach the Rainfly A) Extend rainfly pole and place in position ready for installation. B) Insert one end of rainfly pole into pole pocket on underside of rainfly. Gently flex pole and insert opposite end into other pole pocket. C) Align rainfly front to front of tent and drape rainfly over tent. D) Attach the s-hooks to the pin-ring at the tent base. Step 4: Stake Tent Stake tent by driving stakes through the pin-rings at the base of tent. Step 5: Adding Accessories The gear loft is for extra storage of light weight items (i.e.maps, eye glasses). Attach its s-hooks to the fabric loops inside tent ceiling. CAMPERS WANT TO KNOW Should I use a seam sealer? We highly recommend seam sealing your tent seams. Use a seam sealer compound (tube or bottle type) that applies directly to the stitching for best coverage. Make sure compound is completely dry before rolling up your tent. Follow the manufacturer’s directions. DISASSEMBLY INSTRUCTIONS * Make sure all doors are zipped nearly closed, leaving space to allow air to escape when repacking. * Store all Poles and Stakes in their corresponding Bags to prevent any possible tearing or damage to the fabric piece(s). STEP 1: Remove the Stakes Carefully remove stakes by pulling out the hook ends. Tip: Do not pull or tug at the stake loops sewn onto the fabric body. Remove excess soil from the stakes and store them in their bag. STEP 2: Take Down Gear Loft Detach gear loft by unhooking gear loft s-hooks from fabric loops on ceiling. Fold gear loft for storage. STEP 3:Remove Rainfly A) Detach S-hooks and nylon fasteners that hold down rainfly. B) Remove pole from pole pockets. STEP 4: Take Down the Tent A) Unfasten Quick Clips from tent poles. B) Remove poles from pin-rings. C) Slide poles out by carefully pushing them through the sleeves, away from the end at which you are standing. D) Carefully fold poles and store them in their bag. STEP 5: Fold the Tent Fold tent into a rectangular shape the same width as pole bag. Lay pole bag at one end of tent and roll tightly together, slowly squeezing air out as you go. (You can roll rainfly together with tent in this step.) Store tent in carry bag provided. (Following these TMTMTMTM Limited 6 Month Warranty If your product does not work properly because of a defect in materials or workmanship, NorthPole Limited will, for 6 month from the date of purchase, at its option either (a) repair our product with new or refurbished parts, or (b) replace it with a new product. The decision to repair or replace will be made by NorthPole Limited. NORTHPOLE LIMITED RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. If repair is needed during the limited warranty period, the purchaser will be required to furnish a sales receipt as proof of purchase indicating date of purchase, amount paid, and place of purchase. Product will not be covered under warran...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien