Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
• Do not insert pins or any sharp objects into the blanket. • Do not tuck the heated part of material under the mattress. • Do not use if the blanket is wet. • Avoid pressing creases or folds into the blanket. Do not switch on if the blanket is folded, creased or rucked. • Do not use any lead, switch or cord other than the one supplied with this blanket. • Do not coil or lay the lead on the blanket. • Not intended for medical use in hospitals. • WARNING: When storingthe appliance allow it tocool down before folding. ELECTRICAL REQUIREMENTS Check that the voltage on the rating label of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. Warning: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13 amp plug require changing, a 3 amp BS1362 fuse must be fitted. This appliance does not need to be earthed. It is a double insulated product. 3 75263 rev1 9/3/07 09:04 Page 5 BEFORE USE Before using this appliance ensure that the voltage indicated on the product corresponds with the mains voltage in your home. If you are in any doubt about your supply, ask your electrical dealer or local electricity company. WARNING: Do not attempt to use theblanket with controls other than those supplied with the unit asreferred to on the ratinglabel attached to the blanket. Dual control models On double dual models users are able to control their own side of the bed with individual controls, tailoring independent temperatures to independent needs. Each side of the blanket has a completely separate element and each is supplied with its own independent mains lead. A 13amp plug on each lead is essential. Do not connect both flexible cords to one 13amp plug. The two leads should preferably be plugged into individual sockets. However, if only one socket is accessible, then a multi adaptor should be used. WARNING: If you are unsure about electrical connections please contact a qualified engineer. It is quite normal for the switch to become warm as the components encased are part of the protection circuit. SAFEGUARD OVERHEAT PROTECTION SYSTEM Activation The system will remain dormant indefinitely as long as the blanket is operating in the normal temperature range. If for any reason the blanket is operated in an abnormal situation or condition which would otherwise have induced a rapid temperature rise high enough to constitute a hazard the OVERHEAT SYSTEM should intervene by cutting off the supply current before the temperature reaches the point at which damage may occur. It is normal for the lead from the blanket to the switch to become warm as this is part of the heater protection circuit extended to the switch. In the event of the OVERHEAT SYSTEM operating, the blanket will cease to function. WARNING: No attemptshould be made to repairthe blanket or have it repaired locally and theswitch supplied mustnever be replaced sincethe specialised components are notgenerally available. The fact that this blanket incorporates the overheat system does not absolve the user from observing these instructions. 4 UK Helpline 0870 060 2614 Ireland Helpline 1800 409119 75263 rev1 9/3/07 09:04 Page 6 Fitting instructions • Use only as an underblanket and do not use above the occupant of the bed. • This product can be used with any type of bedding including waterproof bed protectors. • WARNING: Ensure the blanket is not folded, rucked or creased. When in use do not cover with pillows. Mattress covers with elasticated corner tapes A 1 Place the mattress cover directly on the mattress with the control switch end at the head of the bed making sure the connector is facing upwards. 2 Turn the elastic corners underneath the mattress to secure in place A. • Ensuring all creases are smoothed out. 5 75263 rev1 9/3/07 09:04 Page 7 . ‡¤ fl ‹A ‹B › fi FEATURES . LCD screen with back light. ¤ Standby/ON LED. ‹ A Down Arrow B Up Arrow › Slider switch OFF, ON, SLEEP TIMER fi Boost button. fl Mode button ‡ Blanket active LED 6 UK Helpline 0870 060 2614 Ireland Helpline 1800 409119 75263 rev1 9/3/07 09:04 Page 8 HOW TO USE 1 Ensure the blanket is fitted to the bed correctly. Move the slider switch to the ‘OFF’ position. 2 Plug the power lead into the closest socket, using an extension lead if needed to ensure that the lead is not stretched. Start up 1 When plugged in, the red power LED will illuminate. The switch is already in time set mode. 2 Select the appropriate hour AM/PM by using the down arrow ‹A or the up arrow ‹B. Press the mode button fl. The minute symbol will then flash, select the appropriate time. Press mode again and the clock will be set A. All night use (manual) NOTE: Blankets are perfectly safe to be used all night. However we...