Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Step Action 1 Place the LogMan II in the docking station and verify that the USB cable is connected to the docking station and the PC. 2 Start LogView. 3 Select the drive where you store log files from the Select Archive Drive dropdown list on the left side of the LogView window. 4 Open ( double- click) the folder in which to save the log files in the Select Archive Path list box. 5 Select Retrieve > Psion Link from the LogView menu. The Psion Link dialog opens. 6 Select LOGMAN II from the DEVICE dropdown list in the Psion Link dialog. 7 Select Copy Logs - PC< - from the Command dropdown list. Click Execute. 8 When the STATUS line reads Copy Finished, click Close. For More Information For more information, please see the LogMan II User Manual included on the CD- ROM. To contact Johnson Controls about this product, please visit our website at Description The LogMan II is a portable device for the retrieval and transfer to PC of refriger- ated container data for cargo handling verification and documentation. The LogMan II is fully supported by the LogView application and works with all major reefer controllers. The unit is simple to use and ruggedly built to withstand the hard environment of container terminals and shipboard transport. In addition to log retrieval, the LogMan II allows the user to: • Set controller date and time • Set container ( or genset) ID • Set container trip start date • Store load and discharge ports • Enter temperature probe correction values • Store a container comment • Calibrate temperature probes • Update controller firmware • View genset fuel level, set tank size and low- fuel warning level Getting Started LogMan II Revision 1.0 Package Contents Software Installation The LogMan II is supplied with the following: Follow the steps below to install LogView from the installation CD- ROM. • PSION Workabout Pro Second Generation Hand- Held Computer • PSION Workabout Pro Desktop Docking Station with AC power adaptor, adaptor plugs, and USB A- B cable • LogView software installation CD- ROM ( trial version) • Standard multi- cable for controller connection • This “ Getting Started” Guide First Use The LogMan II is ready to use after charging the battery. Get started as follows. Step Action 1 Connect the docking station to AC power using the provided power supply and plug adaptor. 2 Insert the hand- held computer into the docking station and press it down until it locks. Allow the battery to charge for up to 6 hours. A full charge is indicated by solid green light from the charging indicator, which is located above the < ENTER> key. It is recommended that you place the LogMan II in the docking station when not in use to keep the battery fully charged. 3 To turn on the device, press and hold the < ENTER> button for a second or two. To turn off the device, press the blue