Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Coleman Dateigröße: 461.57 kb Dateiname: Unterrichtssprache:

9260-212 Part No. 9260-213 Rainfly Part No. 9260-211 1 Layout & Positioning of Tent, Pole Assembly -Layout and position tent with door facing desired direction. (illus. 1) -Unzip door. -Stake down tent corners only, using the rings at the end of the stake loops. Keep the floor taut. (illus. 2) -Assemble frame poles by interlocking shock-corded poles. This will make two long poles. -Insert the poles diagonally into pole sleeves.The center of the poles should cross forming an "X” in the middle of tent. (illus. 1) -Fasten frame tie on top of tent over both poles. (illus. 1), (illus. 3) Assembled poles inserted through pole sleeves 2 Connect Frame to Tent -Insert one end of main tent pole end onto pin of pin & ring system, at tent corner. (illus. 4) -Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole. -Repeat for second pole. Tent frame set-up * illus.4 Insert pole end onto pin & ring з Attach Tent to Frame Using Frame Clips -Attach frame clips along the edges of tent to frame poles. (illus. 5), (illus. 6) -Make any adjustments to the tent corner stakes that are needed. illus. б Frame clips illus. 6 Assembled tent without rainfly. 4 Attach Rainfly -Assemble rainfly pole by interlocking shock-corded pole. -Insert rainfly pole through pole sleeve above vestibule door on the underside of rainfly. (illus. 7), (illus. 8) -Drape rainfly over tent frame, pole side down. Rainfly pole should be over the tent door. -Insert one end of rainfly pole end onto pin of pin & ring system, at the front tent corner. (illus. 4) -Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole. -Connect the four elastic loops with "S” hooks, (found at the rainfly corners) to the four rings located at the end of the stake loops at the corners of the tent. -Secure rainfly with frame ties located on underside of fly. (illus. 8) -Stake out the tent with guylines. (illus. -Stake out front of the vestibule. Frame ties Pole sleeve illus. 7 Insert rainfly pole piece through the pole sleeve on the underside of the rainfly Vestibule door may be rolled up and secured with toggle & loops for added ventilation Guyline В) illus. 8 Completed tent with rainfly. Note where rainfly pole sleeves, rings, and under ties are located. "S” hooks attach rings at the corners Things You Should Know • Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent. • Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack s...

Herunterladen

Geben Sie zwei Ziffern: