Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
9392-2281 Hub (1) Part No. 9392-2351 1 Pole Assembly -You will need to assemble and connect one pole at a time to the hub. -Do not completely assemble poles. a) Beginning at spring-clip end of pole, assemble all but the last shock-corded section. The pole and one section should curve downward. (illus. 2) b) Insert the spring-clip end into one of the hub ports until it clicks into position. (illus. 1), (illus. 2) c. Repeat for each of the five remaining poles (illus. 2) Illus. 2 Shelter laid out in position with partially assembled frame locked into hub. 2 Attach Shelter to Frame -With the frame still partially set up, clip the center of the shelter to the center hub. (illus. 3) -Starting towards the center of the shelter, clip the shelter fabric to the poles. Start by attaching the center of the shelter to the pole hub. 3 Complete Shelter -Fully extend each pole by straightening all shock-corded pole sections. -Insert the pin on the pin and ring system, at the corner of the Screen House into the the pole end. (illus. 4), (illus. 6) -Repeat for remaining poles. -Adjust poles to pull the shelter taut and stake down through the fabric loops at the end of pin and ring. (illus. 5), (illus. 6) -Attach guy lines to fabric guy loops at each corner and stake out (illus. 6) -Screen doors conveniently tuck into pocket when not in use. (illus. 7) illus. 7 When not in use, screen door can be tucked into side pocket. (Do not store shelter with screens in pocket.) illus. 3 Shelter clipped to partially assembled frame illus. 4 Insert into the pole end illus. 5 Stake through stake loop Things You Should Know • Never store shelter, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your shelter. Use separate storage bag. • STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE SHELTER FABRIC OR STAKE LOOP TO REMOVE STAKE. • SHELTER POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE. • Do not leave your shelter set-up for weeks at a time, be aware that exposure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored. WARNING: Keep all flame and heat sources away from this shelter fabric. This shelter meets the flammability requirements of CPAI-84. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the shelter fabric may render the flame-resistant properties ineffective. THE COLEMAN CO., INC. 3600 N. Hydraulic • Wichita, Kansas 67219 1-800-835-3278 • MADE IN SRI LANKA PRINTED IN SRI LANKA Rev. 11/04...