Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
SOME STATES, PROVINCES, OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. How to Obtain Warranty Service Take the product to an authorized Coleman service center. You can find the nearest authorized Coleman service center by visiting or calling 1-800-835-3278 or TDD 316-832-8707 in the United States or 1 800 387- 6161 in Canada. If a service center is not conveniently located, attach to the product a tag that includes your name, address, daytime telephone number and description of the problem. Include a copy of the original sales receipt. Carefully package the product and send either by courier or insured mail with shipping and insurance prepaid to: For products purchased in the United States: The Coleman Company, Inc. 3600 North Hydraulic Wichita, KS 67219 The costs of transporting the product to Coleman or an authorized service center for warranty service is the responsibility of the purchaser. DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. DO NOT SHIP WITH THE BATTERIES INSTALLED. If you have any questions regarding this warranty please call 1-800-835-3278 or TDD 316-832-8707. ©2007 The Coleman Company, Inc. All rights reserved. Coleman®, , and the shape of the lantern are registered trademarks of The Coleman Company, Inc. For products purchased in Canada: Sunbeam Corporation (Canada) Limited DBA Jarden Consumer Solutions 20B Hereford Street Brampton (Ontario) L6Y 0M1 TO CHANGE FLUORESCENT BULB NOTE: This lantern uses an 11-watt Spiral Fluorescent Bulb (See Parts List for replacement #). 1. With lantern in normal upright position, remove small screw along back side just below clear globe. See Figure 2. 2. Then remove top cover and globe by unscrewing counterclockwise as shown in Figure 2. 3. Pull the bulb-holder lever outward away from the fluorescent tube. See Figure 3. Then pull bulb from socket. 4. Handle new bulb by socket base only, avoiding contact with glass. Install new bulb and push lever inward to secure bulb in place. 5. Assemble top cover and globe to lantern by rotating clockwise until hand tight. Reinstall small screw on back side of lantern. Check that globe is securely fastened to lantern before transporting. THINGS YOU SHOULD KNOW 1. Operating time for this lantern depends on whether it is run continuously or intermittently. Intermittent operation extends the run time of the batter y. 2. In cold temperatures, the fluorescent bulb is more difficult to light and may be dim until it warms up. Below 20°F (-7 °C), the bulb may not light. 3. When the fluorescent tube does not light to full brilliance, batter y should be recharged. If this is not done and lantern is used, the tube may become blackened. 4. To clean the outside of the lantern and globe, use only a damp cloth and mild dishwashing liquid. Avoid excessive water and strong cleaner which can damage lantern. 5. The batter y used in this unit is a sealed, lead-acid batter y which offers slower drain and longer operating time than other type batteries available. The batter y will never leak acid or corrosive materials, and when used properly can give reliable, long-lasting power for many years. Fig. 2 Fig. 4 RECHARGEABLE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. See recyling information that came with your Coleman Batter y Lantern. TO CHANGE NIGHTLIGHT BULB NOTE: The nightlight in this lantern can be replaced with Coleman part number 5357-129. 1. Remove nightlight cap by twisting counterclockwise 1/4 turn until cap can be pulled away from lantern. See Figure 4. 2. Unscrew old bulb and replace with new bulb. 3. Reinstall nightlight cap by twisting clockwise 1/4 turn until cap is tight. Fig. 3 Fluorescent tube(s) contains mercur y (Hg) and must be recycled or disposed of according to local, state or federal laws. Call (800) 835-3278 or visit for recycling instructions or safe disposal locations. Carefully read all instructions before use and save for future reference. TO CHARGE BATTERY When the batter y is fully discharged, it will take 16 to 18 hours to fully recharge it. To obtain maximum per formance, charge for 18 hours for the first three cycles. Always charge the batter y immediately after use whenever possible. Charge indoors using household source. On a full charge, the continuous run time is up to 9 hours on LOW and 6 hours on HIGH. Total run time will increase if the unit is turned on and off intermittently. Do not leave the lantern turned on after the batter y has stopped, as overdischarging the batter y can cause problems in recharging the batter y to a full charge. If this does occur, immediately switch the lantern off and recharge for 40 hours. After an extended period of storage ...