Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Step 4: Slide the upright tube cover (I) down to conceal tube connection. Use Tool6mm Note: Be careful not to pinch the sensor wire connection during assembly. Assembly ASSEMBLY FOR BACK REST SUPPORT TUBE Attach the back rest support tube (P) to the seat support tube (P) and secure using 3 allen screws (N1) and 3 flat washers (N3). 5 ASSEMBLY FOR SEAT SUPPORT FRAME Attach the seat support tube (P1) to the seat slide assembly (A10) and secure it using 4 allen screws (N1). A2PN1J1N8J1-1A10RA3For Cosmetic Purposes OnlyP1N1N3(Not used in this model) Use Tool6mm Use Tool5mm ASSEMBLY FOR LEFT HANDLEBAR Step 1: Connect pulse wire (J1-1) from left handlebar (J1) and pulse wire (A3) from seat slide assembly (A10). Step 2: Mount the left handlebar (J1) to the seat slide assembly (A10) and secure with 4 allen screws (N8). Assembly 6 N1A3N3PA11A2N8J2J2-1GP1A10A11N10 ASSEMBLY FOR RIGHT HANDLEBAR Step 1: Connect pulse wire (J2-1) from right handlebar (J2) and pulse wire (A3) from seat slide assembly (A10). Step 2: Mount the right handlebar (J2) to the seat slide assembly (A10) and secure with 4 allen screws (N8). Use Tool3mm Use Tool5mm ASSEMBLY FOR SEAT SLIDE ADJUSTMENT HANDLE Insert the seat slide adjustment handle (A11) into the seat slide adjsutment collar on the rear main frame (A2) and secure with an M6 set screw (N10). ASSEMBLY FOR SEAT CUSHION Attach seat cushion (G) to the seat support frame (P) using 4 screws (N1) and 4 flat washers (N3). Assembly KM1M2J1J2N9N9N6HPN12N12 7 ASSEMBLY FOR BACK CUSHION Step 1: Attach the back rest (H) to the seat support tube (P) and secure it using 4 allen screws (N6). ASSEMBLY FOR ACCESSORY TRAYS Step 1: Attach the right accessory tray (M2) to the right handlebar (J2) and secure using 3 screws (N9) and 3 oval washers (N12). Step 2: Attach the left accessory tray (M1) to the right handlebar (J1) and secure using 3 screws (N9) and 3 oval washers (N12). Step 3: Place water bottle (K) in one of the accessory trays. Use Tool6mm Assembly 8 EN5N11 ASSEMBLY FOR HANDLEBAR Attach the upright handlebar (E) to the upright post (D) and secure it with 2 allen screws (N5) and 2 flat washers (N11). Use Tool6mm Assembly DFA34A33D1 9 ASSEMBLY FOR CONSOLE Step 1: Connect the sensor wire (A34) and pulse wire (A33) with the corresponding wires on the console (F). Step 2: Remove the screws (D1) that are preinstalled on the back side of the console. Step 3: Gently push all wires into the upright post and mount cosole (F) by sliding onto the console mounting plate at the top of the upright tube (D). Secure using 2 screws (D1). Assembly 10 A1L-(L) L-(R) L-(R) S5L-(L) S4CLOCKWISECOUNTER-CLOCKWISE ASSEMBLY FOR PEDALS Step 1: Attach left pedal strap (S4) to left pedal (L-L) and right pedal strap (S5) to right (L-R) pedals. Step 2: Thread the left pedal (L-L) into the pedal crankshaft in the counter-clockwise direction. Step 3: Thread the right pedal (L-R) into the pedal crankshaft in the clockwise direction. Use Tool15mm13mm Assembly Congratulations! You have completed the assembly of your new Keys Fitness R4.0 Recumbent Bike! Assembly ADJUSTING YOUR SEAT POSITION PULL UP (LOCK) PULL DOWN (RELEASE) Assembly ADJUSTING YOUR BACKREST POSITION Assembly AC ADAPTOR PLUG-IN LOCATION Adapter (S)A1 TRANSPORTING YOUR UNIT TRANSPORT WHEELS Assembly Console Information CONSOLE BUTTONS MODE: This button is used as an enter key, and will allow user to move to the next setting that can be changed. When pressed and held for 2 seconds or more, console will go back to the user profile selection screen. RESET: This button is used to return to program selection screen when workout is paused by pressing start/ stop button. START/STOP: This button is used to start or stop training. RECOVERY: This button is used to begin the Recovery feature of the console (refer to “Console Functions” for more information). UP/DOWN: When changing settings of a program, these buttons are used to increase/decrease TIME, WEIGHT and AGE. During your workout, these buttons are used to increase/decrease the resistance level from 1 to 16. Press and hold for two seconds to rapidly increase/decrease values. Console Information BUTTONS ON ROTATING HANDLEBAR In order to offer more flexibility during your workout, additional toggle switches are placed on the rotating handlebar. The buttons are the +/- and MODE/ENTER. They are used the same way as the buttons on the console. These buttons may be used at anytime as a substitute to pressing the buttons located on the console. CONSOLE FUNCTIONS TIME: If a target time was not selected, time will count up from 00:00 to maximum 99:59. When working out with a target time, time will count down from target to 00:00. When selecting target time, use the +/- buttons, the time will change in 1 minute increments and can range from 1:00 min to 99:00 mins. Once target is accomplished, window will flash to signify the end of workout. You may press start button again to restart. SPEED: Displays current tra...