Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. POWER SYSTEM SERIES MODEL: KPS-LP1 QUESTIONS? • CALL 1-800-683-1236 Monday-Friday 8:30-5:30 Central Time When calling please have the following product information available: . Product Series . Model # . Part Number . Part Description BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner 's responsibility to ensure that all users of this unit have read the Owner 's Manual and are familiar with safety information and precautions. SAFETY PRECATIONS . n This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. . n Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! . n Always examine your unit before using to ensure all parts are in working order. . n Do not leave children unsupervised near or on the unit. . nService to your Power System unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. • ASSEMBLY STEP 1 .. NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Connect Foot Plate Support (4) to Main Frame (1) using: 2 x (11) Pillow Block Bearing 4 x (26) Bolt 8 x (25) Washer 4 x (34) Nylon Lock Nut Attach Foot Plate (5) to Foot Plate Support (4) using: 2 x (20) Bronze Bushing 1 x (9) Foot Plate Shaft 2 x (33) Screws ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. .. STEP 2 Connect Cross Base (6) to Main Frame (1) using: 2 x (27) Bolt 2 x (35) Nylon Lock Nut 4 x (24) Washer 1 x (21) Plate Connect Cross Base (6) to Home Gym using: 2 x (28) Bolt 4 x (24) Washer 2 x (35) Nylon Lock Nut Attach Right and Left Handle Bars (2,3) to Main Frame (1) using: 2 x (27) Bolt 4 x (24) Washer 2 x (35) Nylon Lock Nut REMEMBER: The LP1 Leg Press must attach to your home gym on the weight stack side of the machine. .. ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Insert Back Pad Support (7) into Main Frame (1). Attach Back Pad (16) to Back Pad Support (7) using: 2 x (31) Bolt 2 x (24) Washer Attach Seat Pad (23) to Main Frame (1) using: 2 x (27) Bolt 2 x (24) Washer STEP 3 .. ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Connect Leg Press Cable (8) as shown above using: 5 x (17) Pulley 4 x (29) Bolt 10 x (24) Washer 5 x (35) Nylon Lock Nut 1 x (30) Bolt PARTS LIST # DESCRIPTION QTY Main Frame 1 Right Handle Bar 1 Left Handle Bar 1 Foot Plate Support 1 Foot Plate 1 Cross Base 1 Back Pad Support 1 Leg Press Cable 1 Foot Plate Shaft 1 Pop Pin (Lock) 1 Pillow Block Bearing 2 Plug 44.5 1 Plug 50.8x76.2 2 Plug 32 2 Grip 4 Back Pad 1 Pulley 4.5.± 5 Rubber Bumper 1 Base Pad 2 Bronze Bushing ID 25.4 2 Plate 1 Handle Grip 2 Seat Pad 1 Washer 10 27 Washer 12 8 Bolt M12x40 4 Bolt M10x80 4 Bolt M10x70 4 Bolt M10x45 4 Bolt M10x35 1 Bolt M10x30 2 Allen Bolt M10x25 1 Screw M10x8 2 Nylon Lock Nut M12 4 Nylon Lock Nut M10 11 • .. EXPLODED VIEW KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the original purchaser is lifetime of the original purchaser. Keys warrants that the Product you have purchased for non-commercial, personal, family, or househould use from Keys or from an authorized Keys reseller is free from defects in materials or workmanship under normal use during the warranty period. Your sales receipt, showing the date of purchase of the Product, is your proof of purchase. This warranty only extends to you, the origi nal purchaser. It...