Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Model 89226CA 7/16" REQUIRED TOOLS AND MATERIALS: • 2 Capable Adults • 2 Stepladders • Phillips Screwdriver • (2 each) Wrenches and/or Socket Wrenches and Sockets. 1/2" 9/16" 7/16" 1/2" 9/16" AND/OR READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. WARNING! © COPYRIGHT 2006 by SPALDING IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. This unit is intended for display purposes only and should not be used for play. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly. • During assembly, if using a ladder use extreme caution. Two capable adults are recommended for this operation. • If technical assistance is required, contact the Sample and Display Technician. • Serious injury could occur if teeth/face come in contact with backboard, net or rim. • Display recommended for 2-3/4”” ( cm) or 3-1/2” (9 cm) Round or 4” (10 cm) Square poles only. • All instructions and warnings MUST accompany any display item that is sold. Most injuries are caused by misuse and/or not following instructions. Use caution when installing this unit. ID# M890021 11/06 2 PARTS LIST (See Hardware Identifier) Item Qty. 1 2 2 2 3 2 4 2 5 2 6 1 7 8 8 4 9 8 10 2 11 10 12 3 13 4 14 4 Part No. Description 200318 Bracket, Reinforcement S/J 203223 Bolt, Carriage, 5/16-18 x 1" 908379 Board Bracket 200533 Spacer, Mounting 990062 Pole, 3.5" 908378 Rim 201611 Bolt,Hex-Flange, 5/16-18 x 3" 205544 Bolt, 5/16-18 x 1.25" 203063 Lock Nut, 3/8-16 Nylon Insert 912006 Extension Arm 203100 Nut, Hex-Flange 5/16-18 Whiz Lock 206987 Wedge 203294 Bolt, U, Round, 3/8-16 x 3.5" 203309 Washer Item Qty. Part No. Description 15 2 203470 Washer, Flat, S/J 16 2 203472 Spring 17 2 203795 Nut, 3/8-16 Special S/J 18 2 203796 T-bolt, 3/8-16 x 5" 19 3 203798 Bolt, Hex 5/16-18 x 1.5" 20 3 204290 Net 21 2 Rim 22 2 207103 Pole Cap, 3.5" 23 2 900033 Bracket, S/J 24 1 FR908359 Pole, 2.75" 25 1 909271FR Board, 44" Rectangular, Ball on Court 26 1 919246FR Board, 44", Traditional NBA, Brown 27 1 979281FR Board, 50" Polycarbonate, Blue HARDWARE IDENTIFIER (Bolts and Screws) Item #7 (8) Item #18 (2) Item #19 (3) Item #2 (2) Item #8 (4) HARDWARE IDENTIFIER (Nuts, Washers & Springs) Item #17 (2) Item #9 (8)Item #11 (10) Item #16 (2) Item #15 (2) Item #14 (4) 3 11/06 ID# M890021 Install display boards in the marked locations. Each mounting location consists of a mounting pole stub with the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is facing). CORNER4CORNER3Open - No Board 3-1/2" 65246CA 3" 66281CA 77271CA 3-1/2" 3-1/2" CORNER1CORNER2 Display boards will be mounted as follows: Corner Location 1: 66281CA • 50” Polycarbonate Backboard • Blue Graphic • Black Slam Jam Rim • Use extension arm for assembly Corner Location 2: 77271CA • 44” Rectangle Recycled Board • Basketball on Court Graphic • Black Slam Jam Goal • Use extension arm for assembly Corner Location 3: 65246CA • 44” Trapezoidal Recycled Board • Evolution Logo • Black Standard Goal • Gooseneck Pole System Corner Location 4: Open - No Board ID# M890021 11/06 4 5 24 24 12 19 12 12 19 19 CORNER1CORNER2Corner Location 1 & 2: POLE PLACEMENT At corner location 3 slide the 2.75” diameter pole end of the display pole (24) inside the moiunting stub. Secure the display pole by sliding the display wedges (12) into position as shown. To lock the display pole in place, tighten the hex-bolts (19). Corner Location 3: POLE PLACEMENT At corner locations 1 and 2 slide the 3-1/2" diameter end of the display pole (5) outside the mounting stubs. 5 24 24 12 19 12 12 19 19 CORNER1CORNER2Corner Location 1 & 2: POLE PLACEMENT At corner location 3 slide the 2.75” diameter pole end of the display pole (24) inside the moiunting stub. Secure the display pole by sliding the display wedges (12) into position as shown. To lock the display pole in place, tighten the hex-bolts (19). Corner Location 3: POLE PLACEMENT At corner locations 1 and 2 slide the 3-1/2" diameter end of the display pole (5) outside the mounting stubs. 5 11/06 ID# M890021 Corner Location 1: STEEL FRAME ACRYLIC BACKBOARD ASSEMBLY 1. 27 7 23 Insert “T” bolt (18) through Slam Jam bracket (23) as shown. Secure Slam Jam bracket (23), extension arm (10) and mounting spacers (4) assemblies to backboard usin...