Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
WI 53527 toll free 800.335.4348 • fax 608.839.8731 visionfitness. com . 2009 Vision Fitness. All Rights Reserved. 11.06 AG18.46PRD REV1 R70 COMMERCIAL FITNESS BIKES Assembly Guide M8 Lock Washer Quantity: 8 M5 Lock Washer Quantity: 2 YELLOW BAG BLACK BAG GREEN BAG HARDWARE INCLUDED M5 x 35L Bolt Quantity: 2 M8 x 20L Bolt Quantity: 8 M6 Lock Washer Quantity: 4 M6 x 55L Bolt Quantity: 4 M8 Lock Washer Quantity: 4 M8 Lock Washer Quantity: 2 M10 x 12L Set Screw Quantity: 1 M8x65L Bolt Quantity: 2 PINK BAG BLUE BAG ORANGE BAG M8 x 15L Bolt Quantity: 6 M8 x 20L Bolt Quantity: 2 M8 x 15L Bolt Quantity: 2 15mm Pedal Wrench TOOLS & PARTS INCLUDED 5mm L-Shaped Wrench 4mm L-Shaped Wrench Console Mast Cover Water Bottle Heart Rate Chest Strap Color-coded Hardware Bags Pedals/Straps Owner’s Guide Assembly Guide Warranty Card PARTS BOX 5mm T-Shaped Wrench Screwdriver Assembly Seat Bottom PINK BAG Accessory Tray 3 STEP Pedal • Mount the upper handlebars to the console mast using two lock washers (M8) and two bolts (M8x15L). Tighten with the 5mm T-Shaped wrench. • Remove the four mounting screws from the back of the console. Remove the four console back cover screws. Connect the wire harness and heart rate wires that come from the console mast into the plugs located in the back of the console. Attach the console to the mast with the four screws removed earlier. • Plug in the 9-volt battery. Re-attach the console back cover with the four screws previously removed. Guide R70 COMMERCIAL FITNESS BIKES To avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order. Before proceeding, find your new Fitness Bike’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Fitness Bike. If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12 NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Fitness Bike to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws and bolts are in place and partially threaded in before completely tightening any ONE screw or bolt. 5 STEP 6 STEP GREEN BAG 4 STEP • Remove the two socket head bolts from the sliding seat adjustment bracket. Slide the seat adjustment handle between the teeth of the seat adjustment bracket. Re-insert the two socket head bolts and tighten with the 4mm L-shaped wrench. • Attach the seat frame to the sliding seat bracket using four lock washers (M8) and four bolts (M8x20L) and the 5mm T-Shaped wrench. • Connect Wires A on the seat handlebar to Wires B on the sliding seat bracket. Connect the wire harness coming from the seat frame to the wire harness in the handlebars. Attach the seat handlebars to the sliding seat bracket using four lock washers (M8) and four bolts (M8x20L). Tigh...
Dieses Handbuch ist für folgende Modelle:Kraftstationen - COMMERCIAL FITNESS BIKES R70 (1.3 mb)