Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Box 280 • Lake Mills, WI 53551 toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 ©2008 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480, US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7 9.08 AG18.28PRD REV3 TOOLS & PARTS INCLUDED Screwdriver 5mm T-Shaped Wrench 13mm/15mm Wrench 6mm L-Shaped Wrench 4mm L-Shaped Wrench 5mm L-Shaped Wrench PARTS BOX GREEN BAG M8x13L Screw Quantity: 620x29x1.5T Wavy Washer Quantity: 2 Dual-Action Axle Covers Pedal Arm Bracket Covers Pedal Support Bracket Water Bottle & Cage Power Supply Color-coded Hardware Bags Assembly Guide Warranty Card ORANGE BAG PINK BAG BLACK BAG 8x38x2T Washer Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Bolt Quantity: 2 M5x12L Bolt Quantity: 4 8x15x2T Washer Quantity: 3 M8x60L Bolt Quantity: 3 25x34x2T Wavy Washer Quantity: 2 8x25x1.5T Washer Quantity: 2 M8x30L Bolt Quantity: 2 BLUE BAG M5x10L Bolt Quantity: 2 8x38x2.0T Washer Quantity: 2 5x10x1T Washer Quantity: 2Rubber Nut Cap Quantity: 2 5x10x1T Washer Quantity: 4 Link Arm Sleeve Quantity: 2 25x34x2T Wavy Washer Quantity: 2 M8x20L Bolt Quantity: 2 M8x20L Bolt Quantity: 2 8x14x1T Washer Quantity: 2 YELLOW BAG 8x17x1T Arc Washer Quantity: 4M8x25L Bolt Quantity: 4 6x12x1.0T Washer Quantity: 4 M6x15L Bolt Quantity: 4 17x40x1.0T Washer Quantity: 2 STEP 3 • Slide a wavy washer (25x34x2T) onto the right rotation axle. Slide the bushing housing of the right pedal arm onto the right rotation axle. The pedal arm roller wheel should be placed in the groove of the guide rail. Secure the pedal arm to the rotation axle with a washer (8x38x2.0T) and bolt (M8x20L). Tighten with a 5mm T-shaped wrench. • Place the pedal arm bracket cover over the bushing housing of the pedal arm. Secure in place with a washer (5x10x1T) and bolt (M5x10L). Tighten with the screwdriver. • Repeat both steps on the left side. BLUE BAG To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer. If any parts, hardware or tools are missing, please call 1.800.335.4348 NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw. A s s e m b l y G u i d e X6200 FOLDING ELLIPTICAL TRAINER STEP 5 GREEN BAG STEP 6 • On the right side, slide the dual- action axle cover into place on the console mast axle. Slide a wavy washer (25x34x2T) onto the axle. Slide the right dual-action arm on the axle. Fix in place with the washer (8x38x2T) and locknut (M8). Cover with the included nut cap. • Make sure the sleeve is in place in the socket joint of the lower link arm. Connect the lower link arm to the dual action arm with a bolt (M8x30L). Attach the washer (8x25x1.5T) and nut (M8) to the end of the bolt. Tighten with the 5mm L-Shaped wrench and 13mm wrench. • Position the link arm cover over the joint of the lower link arm and secure the two pieces of the cover together with a panhead bolt (M4x15L). Connect the cover to each side of the lower link arm with a washer (5x10x1T) and bolt (M5x12L). • Set multi-position grip on the dualaction arm. Secure with two washers (6x12x1.0T) and two bolts (M6x15L). Tighten with the 4mm L-shaped wrench. • Repeat these steps on the left side. BLACK BAG STEP 1 STEP 2 • Slide a wavy washer (20x29x1.5T) on the lower link arm axle, which is located under the foot plate. Slide the axle through the bracket located on top of the pedal arm. • Secure the lower link arm to the pedal arm by attaching the pedal support bracket with three bolts (M8x13L). Tighten with the 5mm T-shaped wrench. • Repeat this step on opposite side. STEP 4 Pedal Arm Bracket Cover Rotation Axle Dual-Action Axle Cover Link Arm Covers STEP 1 • Place a piece of packaging under the front of the unit to aid in assembly. • Secure the front stabilizer to the base frame plate with four bolts (M8x25L) and four arc washers (8x17x1.0T). Tighten with the 5mm L-shaped wrench. YELLOW BAG Guide Rail Pedal Arm Lower Link Arm Console Console Mast Boot Frame Bracket Dual-Action Arm Guide Rail Axle Stabilizer STEP 2 • Place a piece of packaging under the front of the unit to aid in assembly. • Slide the axle through the plastic sleeve of the frame. Slide a washer (17x40x1.0T) onto each side of the axle. Slide the left guide rail onto the left side of the axle and the right guide rail onto the right side of the axle. • Slide t...