Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
. 6 WARRANTY.................................................................................................… 7 ORDERING PARTS......................................................................................... 7 BEFORE YOU BEGIN Thank you for selecting the IRON GRIP STRENGTH Deluxe Flat Bench IGS-663 by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you. Toll-Free Customer Service Number 1-800-999-8899 Mon. - Fri. 9 a.m. - 5 p.m. PST info@impex-fitness.com 1 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should use the machine. 3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY. 4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors. 5. Keep hands away from all moving parts. 6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine. 7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. 12. Maximum weight capacity 300 lbs. CARE AND MAINTENANCE 1. Inspect and tighten all parts before using the machine. 2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2 WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Stabilizer Base. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3 HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Exploded Diagram) A.) Attach the Main Frame (#1) to the Stabilizer (#2). Secure it with two M10 x 2 1/8” Allen Bolts (#10), two . .” Washers (#13), and one Bracket (#3). B.) Attach two L-shaped Brackets (#4) to the holes on the Main Frame. Secure the Brackets with one M10 x 4” Allen Bolt (#11), two O .” Washers (#13), and one M10 Aircraft Nut (#15). Repeat the same procedure to install the other two Brackets. Do not tighten the Brackets yet. C.) Place the Seat Pad (#6) onto the Main Frame. Align the holes to the Brackets. Secure it with four M8 x .” Allen Bolts (#12) and O 5/8” Washers (#14). Securely tighten all Nuts and Bolts previously installed. D.) Insert the Foam Tube (#5) halfway through the hole on the Main Frame. Push two Foam Rolls (#7) onto the Tube. Plug two Foam Roll End Caps (#8) to the Ends. EXPLODED DIAGRAM 5 PARTS LIST KEY NO. 1 23 4 5 6 7 8 9 10 11 12 13 14 15 DESCRIPTION Q’ty Main Frame 1 Stabilizer 1 Bracket 1 L-shaped Bracket 4 Foam Tube 1 Seat Pad 1 Foam Roll 2 Foam Roll End Cap 2 Stabilizer End Cap 2 M10 x 2 1/8” Allen Bolt 2 M10 x 4” Allen Bolt 2 M8 x .” Allen Bolt 4 O .” Washer 6 O 5/8” Washer 4 M10 Aircraft Nut 2 6 IMPEX® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX®") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's ...