Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. POWER SYSTEM SERIES MODEL: KPS-LS QUESTIONS? • CALL 1-800-683-1236 Monday-Friday 8:30-5:30 Central Time When calling please have the following product information available: • Product Series • Model # • Part Number • Part Description BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. SAFETY PRECATIONS • This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! • Always examine your unit before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the unit. • Service to your Power System unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Front Base (1) to Middle Base (2) with Bolts (34), Washers (31) and Nylon 1343131323231236313Lock Nuts (32). Connect Main Upright (3) to Middle Base (2) with Bolts (36), Washers (31) and Nylon Lock Nut (32). • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Attach Angle Plate (4) to frame with Bolts (36) (35), Washers (31) and Nylon Lock Nuts (32). Connect Left (6) and Right (7) Legs to Main Upright with Bolts (35), Washers (31) and Nylon Lock Nuts (32). 467353135313231313632313231 • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Place Pillow Block Bearings (27) onto Main Arm (11) and secure to Main Upright with Bolts (30), Washers (28) and Nylon Lock Nuts(29). 2928283027113028 • 48 18 14 43 41 15 15 41 42 47 10 46 44 45 13 17 Complete Pin Handle assembly as shown below. Insert Slide Support (10) into Main Arm and secure with Pin Handle. STEP 4 ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. .. .. 8 9 33 31 34 31 5 31 33 50 31 32 12 Attach the Front (9) and Rear (8) Pads to the Main Arm as shown with Bolts (33) and Washers (31). Connect Olympic Adapters (12) to the Main Arm using Bolts (34), Washers (31) and Nylon Lock Nuts (32). Make sure that the Olympic Adapters are assembled so that they point upwards in order to keep the Olympic Plates from sliding off. ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 PARTS LIST # DESCRIPTION QTY front base 1 middle base 1 main upright 1 angle plate 1 weight holder 2 left leg 1 right leg 1 rear pad 2 front pad 2 slide support 1 main arm 1 olympic adapter 2 pin 1 pin handle 1 link plate 2 small grip 1 nut plug 1 spring 1 grip 2 plug 40*70 1 plug 45 3 plug 48 5 plug 50 2 plug 25*50 2 bumper 1 rubber spacer 3 pillow block bearing 2 washer 13*26*2 8 nylon locknut M12 4 bolt M12*40 4 washer 11*23*2 37 nylon locknut M10 12 bolt M10*30 12 bolt M10*70 6 bolt M10*75 3 bolt M10*95 4 washer 9*16*1.6 1 allen bolt M8*25 1 spring washer 10 2 washer 10*30*2 2 washer 5.5*10*1 4 shoulder bolt M5*25 2 nylon locknut M5 2 washer 6.6*12*1.6 2 allen bolt M6*25 1 nylon locknut M6 1 bolt M8*55 1 nylon locknut M8 1 allen bolt M10*30 2 plate 2 • EXPLODED VIEW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 17 18 19 20 21 22 23 24 24 25 26 21 27 28 30 29 28 33 32 32 33 34 36 37 38 39 40 41 42 43 46 44 45 47 48 49 22 34 31 33 31 32 31 31 32 31 31 31 35 30 31 50 44 31 32 35 32 .. KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty pe...