Stimmen - 4, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Casio Dateigröße: 542.36 kb Dateiname: PDM10B_20B.pdf Unterrichtssprache:

5. After you are finished setting the stride length you want, simply wait and the pedometer will automatically exit the stride length setting screen and return to the distance screen. RESET SET MODE SET button STRIDE (cm) STRIDE (cm) RESET SET MODE DIS (km) DIS (km) STRIDE (cm) RESET SET MODE DIS (km) TO SET YOUR CURRENT WEIGHT (PDM-20B) 1. While the number of steps screen is displayed, press the MODE button twice to display the calorie screen. 2. Press the SET button to display the weight setting screen. 3. While the weight screen is on the display, use the SET button to specify your current weight. •The display will exit the weight length setting screen automatically if you do not perform any operation for a few seconds. •Each press of the SET button increases the displayed weight by 1 kg. You can set a value in the range of 30 kg to 120 kg. •Holding down the SET button changes the setting at high speed. 4. After you are finished setting your weight, simply wait and the pedometer will automatically exit the weight setting screen and return to the calorie screen. CALORIE (kcal) CALORIE (kcal) WEIGHT (kg) WEIGHT (kg) WEIGHT (kg) RESET SET MODE SET button RESET SET MODE RESET SET MODE CALORIE (kcal) RESETTING THE PEDOMETER (PDM-10B) Press the RESET button to reset the number of steps to “0”. (PDM-20B) Press the RESET button to reset the number of steps, distance, and calories to “0”. Note that the RESET operation does not affect the stride length and weight settings. •Before starting a new pedometer measurement operation, be sure to reset to “0” first. 3 Operation Guide PDM-10B/20B BATTERY REPLACEMENT Replace the battery whenever the figures on the display become dim and difficult to read. Replacing the Battery (PDM-10B) 1. Remove the screws that secure the back cover in place. 2. Remove the old battery. 3. Load a new battery so its positive (+) side is facing up (so you can see it). •Loading the battery improperly can cause it to leak and damage the interior of the pedometer. 4. Replace the back cover and secure it in place with the screws. (PDM-20B) 1. Insert a coin or similar object into the slot on the bottom of the pedometer. 2. Move the coin up and down to remove the cover from the front panel. 3. Remove the old battery. 4. Load a new battery so its positive (+) side is facing up (so you can see it ). •Loading the battery improperly can cause it to leak and damage the interior of the pedometer. 5. Replace the cover on the front panel. •Insert the tabs of the cover into the slots, and then press the cover until it snaps securely in place. •Check to make sure that the front panel cover is securely and properly in place. 6. Hold down the RESET, SET, and MODE buttons at the same time for about three seconds until everything clears from the display. 7. Release the buttons. •This causes “88888” to appear for about two second, and then the number of step screen appears. •At this time the number of steps, distance, and calorie screens will all be “0”. •The stride length and weight values are also reset to their initial defaults at this time. Perform the required procedures to re-specify your stride length and weight. Battery Precautions •Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. •Be sure to load the battery with its positive (+) side facing upwards (so you can see it ). •Never charge the battery that comes with the pedometer. •Should the battery ever leak inside the pedometer, wipe out the fluid with a cloth, taking care not to let any get onto your skin. •Replace the battery at least once every 3 years, even if the current battery is working properly. •The battery that comes with the pedometer loses some of its power during transport and storage. 3 Operation Guide PDM-10B/20B BATTERY REPLACEMENT Replace the battery whenever the figures on the display become dim and difficult to read. Replacing the Battery (PDM-10B) 1. Remove the screws that secure the back cover in place. 2. Remove the old battery. 3. Load a new battery so its positive (+) side is facing up (so you can see it). •Loading the battery improperly can cause it to leak and damage the interior of the pedometer. 4. Replace the back cover and secure it in place with the screws. (PDM-20B) 1. Insert a coin or similar object into the slot on the bottom of the pedometer. 2. Move the coin up and down to remove the cover from the front panel. 3. Remove the old battery. 4. Load a new battery so its positive (+) side is facing u...

Herunterladen

Geben Sie zwei Ziffern: