Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Part # □ 1 Pec Mounting Bracket Assembly □ 2 Pec Pulley Bracket (Preassembled with items #2a - #2e) □ 2a ♦ V-Pulley □ 2b ♦ Pulley Cover □ 2c ♦ Floating Pulley Bracket Assembly □ 2d ♦ 4 1/2" Pulley □ 2e ♦ Pec Cable (w/ Preassembled Terminations) □ 3 Left Cam Assembly □ 5 Pec Arm Assembly (Preassembled with #5a) □ 5a ♦ Pec Pad Collar □ 6 Pec Fly Pad □ 7 Seat Back Hardware Pack ^ Preassembled Hardware □ 20 3/8" Lock Nut Nautilus Hardware Size Chart #8 Qty: 2 #9 Qty: 2 #14 Qty: 2 =1 I \ A -.y \i A M #11 Qty: 2 #12 Qty: 2 #13 Qty: 2 Required Tools: □ 3/4",and 9/16" Wrench □ 5/32", 3/16", and 5/16" Allen Wrenches (Included with Cage) Nautilus 2 Step #1 Materials: Nautilus Using the hardware shown, Attach the PEC MOUNTING BRACKET ASSEMBLY (1) and the PEC PULLEY BRACKET (2) to the Lat Upright (A). Ensure that the the PEC PULLEY BRACKET (2) is positioned in the proper orientation. Tighten all hardware in Step A. 3 step 2 Step #2 Materials: Determine which CAM ASSEMBLY is the Left and which CAM ASSEMBLY is the Right by a decal on the CAM stating either 'L' or 'R'. Uninstall the Hardware in the Pec Mounting Bracket Assembly Position the LEFT CAM ASSEMBLY (3) and the PEC ARM ASSEMBLY (5) as shown in the diagram, and engage their pivot shafts. Place the LEFT CAM ASSEMBLY (3) and the PEC ARM ASSEMBLY (5) between the two plates on one side of the Pec Mounting Bracket Assembly (A) and secure with the hardware shown. Repeat Step C for the RIGHT CAM ASSEMBLY (4) and the remaining PEC ARM ASSEMBLY (5). Thuroughly tighten all hardware from above steps, and place a NUT CAP (13) on top of the hardware. Nautilus 4 step 3 Step #3 Materials: A. Slide the PEC FLY PAD (6) onto the Right Pec Arm Assembly (A) and secure with a PEC PAD COLLAR (5a) and a 5/16" # Description Qty. SET SCREW (18). Tighten all hardware. □ 5a Pec Pad Collar 2 B. Repeat step A for the Left Pec Arm Assembly. □ 6d Pec Fly Pad 2D C. Remove the Lat Cable (G) from the Lat Cable Termination □ 7D Seat Back 1 Assembly (B). Remove the Lat Cable Termination Assembly □ 9D Cap Screw - 3/8" x 2.75"L 2D (B) from the Lat Upright Assembly (F) and all hardware □ 11D 3/8" WasherD 2D (C, D, and E). Discard the Lat Cable Termination Assembly □ 18 5/16" Set Screw (Preassembled) 2D (B) and all hardware (C, D, and E) D. Attach the SEAT BACK (7) to the Lat Upright Assembly (F)D with the hardware shown. Tighten all Hardware. i ^Nautilus 5 NT-1830 step 4 Step #4 Materials: A. Thread the Lat Cable (A) into the FLOATING PULLEY BRACKET ASSEMBLY (2c) # Description Qty. B. Remove the cable termination from both ends of the PEC CABLE (2e) by removing the Button Head Cap Screw (B), □ 2cD Floating Pulley Bracket Assembly in Spacer (C), U-Bracket (D), 2 - Washers (J), and Nut (E). □ 2eD Pec Cable (w/ Terminations) 1 C. D. Attach the PEC CABLE (2e) to the Left Cam Assembly (F) using the given hardware. Attach the other end of the PEC CABLE (2e) to the Right Cam (I) using the termination on the PEC CABLE (2e). Nautilus 6 NT-1830 Lubrication and Final Check A. Lubricate Guide Rods using a silicon based lubricant. B. Carefully inspect all cables and insure that they are properly seated on the pulleys and that they pass between the cable stops and pulleys. C. Double check all hardware and make sure everything is tightened properly. Cable Tensioning A. Tighten the Cable System using the combination of four adjustment locations. These locations are the Double Floating Pulley Brackets and the Selector Rod Top Plate Assembly. The Cable System should be tightened as tight as possible yet still allow the Selector Pin to freely engage all weights. B. After the cables are tensioned load the gym with as high a weight as you feel comfortable with and pull each cable several times to set and stretch the cables. C. After the cables are set and stretched, the Cable System may need to be re-tensioned. Tension the cables as described in Step A. D. The cables may need to be tensioned periodically as they may stretch slightly over time. E. INSPECT THE CABLES MONTHLY! Replace immediately if cables show any signs of damage including cracking, splitting, fraying or bulging. The assembly of your NT-1830 is now complete. Should you have any questions or comments regarding your Nautilus product, please feel free to contact our Customer Service Department. The NT-1830 is rated to 300lbs (not included users weight). Maximum user weight limit is 350lbs. Nautilus The Nautilus Group 1886 Prairie Way Louisville, CO 80027 1-800-864-1270 www.nautilus.com...