Stimmen - 4, Durchschnittliche Bewertung: 3 ( )

Hersteller: Star Tech Development Dateigröße: 74.91 kb Dateiname: Unterrichtssprache:

Replace the cover on the computer. 6. Your computer will display a message saying new hardware has been found. Windows 98SE and 2000 users follow the on-screen prompts and direct Windows to the appropriate folder on the driver disk. Windows will install the necessary drivers. 2 Instruction Manual U UUs ssi iin nng gg Y YYo oou uur rr C CCa aar rrd dd R RRe eea aad dde eer rr The following table illustrates the designation for each card port on the reader. Be sure to use the correct slot as indicated, to avoid damaging your Flash Cards or the data that they contain: SLOT A SLOT B SLOT C SLOT D SMC/Others CF/MD/Others SD/MMC/Others MS/MSPro/Others Inserting a Card 1. Turn on your computer. 2. Insert your memory card into the proper slot on the card reader, with the top of the card facing upwards.. 3. Mac users: A new icon will appear on your desktop. Windows users: A new icon will appear in “My Computer.” 4. The card can now be accessed as an extra disk. LED Indicators The LEDs on the card reader are your best indication of the reader’s activity. The red light indicates whether or not your card reader is receiving power. Each card slot has a corresponding LED as indicated by the designated letters for each slot. A solid green light, indicates that a card is detected in the corresponding slot. A flashing green light indicates that data is being accessed from the card in the corresponding slot. Removing a Card 1. Make sure that none of the LEDs on the front of the card reader are flashing. If you remove the card when the LEDs are flashing, data may be lost from your card. 2. Mac users: drag the memory card icon to the Trash bin. Windows users: right-click on the drive icon and choose to eject the card. 3. Physically remove the card from the reader. Permanently removing the Card Reader Use this procedure to permanently uninstall the card reader. 3 Instruction Manual Windows users: 1. Make sure there is no card reader connected to the USB port. 2. Click on the “Uninstaller” icon in the taskbar. 3. Click on “USB Storage Device - Change/Remove.” 4. Remove all installed components and click Next . 5. Choose to restart your computer and click Finish . Mac users: 1. If there is a memory card connected to the card reader, drag the memory card icon into the Trash. Wait until the icon has disappeared. 2. Disconnect the card reader. T TTr rro oou uub bbl lle ees ssh hho ooo oot tti iin nng gg The card reader is not detected: The reader has not been properly connected or is not receiving enough power. Make sure that the reader’s USB cable is firmly seated in the USB port. If you are connecting the card reader to a hub, make sure that it is a powered hub. The card doesn’t fit in the reader: Make sure you are installing the card in the proper slot and that the card is facing the right direction. Check with the card manufacturer’s instructions. A drive letter is shown for the card,but it can’t be accessed: The card has not been formatted or is formatted incorrectly. Follow the instructions provided by the manufacturer of your digital media device (i.e. Your MP3 player, digital camer, etc.) to format the card using your digital media device. No icon appears when a card is inserted into the reader (Mac OSX) The card may have been formatted in Windows’ FAT-32 format. Using a PC or digital device, re-format the card using the OS X compatible FAT or FAT-16 format. 4 Instruction Manual Instruction Manual T TTe eec cch hhn nni iic cca aal ll S SSp ppe eec cci iif ffi iic cca aat tti iio oon nns ss USB Ports 1 x 4 pin USB (Type A) Standards USB 2.0 Data Transfer Rate USB 2.0 devices: Up to 480 Mbits/sec USB 1.1 devices: Up to 12 Mbits/sec Flash Cards: 700 Kbits/sec to 480 Mbits/Sec SATA devices: 150 Mbits/sec Firewire devices: 400 Mbits/sec Compatibility CF Slot: CF I, II, CF Ultra (high speed), IBM MicroDrive, Magicstor MD. SD Slot: Secure Digital Card, SD Ultra (high speed), Mini SD (adapter needed), MMC, MMC 2.0, MMC 4.0, RS-MMC, T-flash adapter needed. SM Slot: Smart Media Card, SM-ROM. MS Slot: Memory Stick, Magic Gate, MS Pro, MS Ultra II, MS Select, MS Duo, MS Pro Duo, Magic Gate Duo, MS Duo Magic Gate (These six require an adapter) LED Indicators Power & Activity System Requirements An available 3.5” bay, Windows 98SE or higher, or Mac OS X Instruction Manual A AAc ccc cce ees sss sso oor rry yy P PPr rro ood ddu uuc cct tts ss f ffr rro oom mm S SSt tta aar rrT TTe eec cch hh. ..c cco oom mm Contact your local StarTech.com dealer or visit for cables or other accessories that will help you get the best performance out of your new product. 139466EXT6 6 ft. i.Link IEEE-1394 FireWire Extension Cable 6 to 6 pin M/F 1394_10 10 Ft IEEE-1394 Firewire Cable 6-6 M/M 139444EXT6 6 ft. IEEE-1394 FireWire Extension Cable 4 to 4 pin M/F USBEXTAA_6 6 ft. Fully Rated USB Extension Cable A-A USB2FAAEXT15 16 Foot (5 Meter) USB 2.0 Active Extension Cable 6 Instruction Manual T TTe eec cch hhn nni iic cca aal ll S SSu uup ppp pp...

Herunterladen

Geben Sie zwei Ziffern: