Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
The starting effort level is set to Level 1. To pause the elliptical: Pressing PAUSE will stop your workout clock, but all statistical information will be preserved. When you are ready to continue, press START to resume your workout. To turn off the elliptical: Pressing OFF will shut down the elliptical. All current statistical information will be cleared. To change effort level: Hold EFFORT “+” key down to increase effort level. Hold EFFORT “-” key down to decrease effort level. To view your speed in different units: Press the UNITS “+/-” to select MPH, Km/hr, and Revolutions per Minute. To view different display screens during your workout: Press NEXT at any time to choose the display screen that best suits your workout. To enter your weight: Press WEIGHT to enter your weight for more accurate calorie and “running” speed calculation. To enter your age: Press AGE to enter your age. This will automatically calculate a recommended target heart rate based on your age (See Heart Rate Monitoring). Important Safety Instructions STARTSTART PAUSEPAUSE WARNING: Failure to observe the following operating instructions can result in serious injury! [1] If you are suffering from any illness, condition, or disability which affects your ability to run, walk or exercise, do not use this product without consulting your doctor first. [2] If you are suffering from any illness, condition, or disability which affects your ability to run, walk or exercise, do not use this product without supervision present. Failure to do so can result in serious injury should you fall while the machine is in motion. [3] Failure to leave ample clearance around the elliptical could result in the user becoming trapped between the mechanism and a wall, resulting in serious injury. Allow a minimum clearance of 6 inches on each side of the elliptical. Allow a minimum clearance of 1 foot at the rear of the elliptical. [4] Be sure to familiarize yourself with this manual. Look it over carefully. Be sure you understand the control panel operation before using the elliptical. When using an electrical appliance, basic precautions should always be followed. Read all instructions before using. DANGER: Always unplug the elliptical before cleaning or removing any shrouds. To reduce the risk of electric shock in the event of an electrical storm, always unplug the elliptical from the electrical outlet immediately after using. SAVE THESE INSTRUCTIONS Important Safety Instructions Table of Contents Table of Contents WARNING: To reduce the risk of electric shock or injury to persons: [1] An appliance should never be left unattended when plugged in. Unplug from outlet when not in use. [2] Close supervision is necessary when this unit is used by or near children or disabled persons. [3] Use this elliptical only for its intended use as described in this manual. [4] Never operate this elliptical if it has a damaged cord or plug, if it is not working properly, or if it has been damaged. Call your selling dealer immediately for examination and repair. [5] Keep the power cord away from heated surfaces. Be sure the line cord has plenty of slack and does not get pinched underneath the elliptical. [6] Never drop or insert any object into any opening. Be sure no objects are near or underneath the elliptical. [7] Do not use outdoors. [8] Do not operate where aerosol (spray) products are being used or where oxygen is being administered. [9] Connect this appliance to a properly grounded dedicated outlet only. [10] To disconnect, press the OFF button, and unplug the unit from the wall outlet. GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. 120 VOLT ELLIPTICALS Ellipticals marked 120 VAC are intended for use in a nominal 120-volt circuit with a grounding plug. Make sure the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. 200 - 250 VOLT ELLIPTICALS Ellipticals marked 200-250 VAC are intended for use on a circuit having a nominal rating more than 120V and are factory- equipped with a specific cord and plug to permit connection to a proper electric circuit. Make sure the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. If the product must be reconnected for use on a different type of electric circuit, qualified service personnel should make the reconnection. DANGER: Improper connection of the equipment-grounding connector can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly g...
Dieses Handbuch ist für folgende Modelle:Kraftstationen - ElliptiMill (784.57 kb)