Login:
Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Anleitung Wintec Industries, modell WBT-200

Hersteller: Wintec Industries
Dateigröße: 454.2 kb
Dateiname: WBT200_English.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Red light solid on while charging. After fully charged red light will snuff out. Bluetooth LED: Light turns off when Blue tooth connection is off. Blue light solid on when Blue tooth connection initiates. Blue light blinks if Blue tooth connection succeeds. Temporarily press this to turn on/off Bluetooth. Press and hold this to turn power on/off. 2 Part 2 Features WBT-200 is the GSP receiver with internal antenna. u-Nav + iTrax 03 used in its core is high-tech component and included function of auto- log record of journey, which are useful in navigation, security tracking purpose, map making and other agricultural needs. USB connector or Bluetooth interface ensures easy linking with other electronic devices .The GPS acquisition status, the last record of time and position can all be stored in unfailing memory. It has 12 GPS channels and its low power-consumption can last continuous 10 hours of operation. WBT-200 can boast of its smallest size ever with fullest features in the world. WBT-200 uses iTrax 03 GPS module (u-Nav base) and the high- performance CPU. Maximum 12 channels can be acquisitioned quickly. Internal decode ”WAAS/EGNOS” is used excluding the need for external hardware in receiving WAAS/EGNOS signal(depend on firmware). System supports NMEA0183 3.0 for data transfer. Data-logging acts like the in-flight black box and can record of position, date and time as long as power source is maintained. For down-load of log-data and programming of WBT-200, provided software tool “G-Tool” can simplify usage. The system is upgradeable with new software which is provided free from us. It is designed to be water-proof. Data link thru bluetooth within 10 meter range. Versatile design aimed for car/personal navigation, fleet management, AVL, tracking and mapping purpose. 3 Part 3 Safety notes GPS (Global Positioning System) is provided by the United States government. Its accuracy may varies depending on special conditions (area at war or if it is blocked). Any control by USA will affect this system and its accuracy. If installed on the transportation device, driver must not operate this while driving. GPS performance is affected when satellite coverage is degraded as near a high-rise building, in the tunnel or under a cover. Personal replacement of components and re-structuring of this is prohibited and may result in loss of legal usage. Operation of this device is strictly prohibited in highly explosive environment such mining, in-flight or other unauthorized area against use of this. Avoid exposing this at places of high temperature and humidity. Return to original dealer immediately if it emits strange smell or fume. 4 Part 4 Quick user guide Package :WBT-200(bluetooth GPS with logger)+USB cable+ sticker+car cigarette lighter power adapter , installation Disk, Quick use guide. WBT-200 Operation: Temporarily press power button to turn it on. The bluetooth and GPS status LED will glow to confirm it is in GPS mode. GPS LED glows green to show GPS acquisition is done (1 Hz). But if this LED is solid on, the GPS acquisition fails. Temporarily press on power button. Bluetooth will turn off after bluetooth LED goes off. Another press on power button can turn bluetooth on after its LED glows again. After power on, press and hold power button to turn the power off. If Power LED (glows red) starts to blink, the power is low and needs recharging. Power LED (glows red) stays solid while charging .It snuff out red LED after it is fully charged. When the USB is used as interface: USB driver must be installed first. After connection to USB port of computer, place the WBT-200 at suitable area where it can best receive GPS signal for acquisitioning. Power it (or switch its power on). WBT-200 will start acquisition. When the bluetooth is used as interface: Ahead of bluetooth connection, make sure the target device to pair can support bluetooth SPP master. After pairing with WBT-200, place it at suitable area where it 5 can best receive GPS signal for acquisitioning. Activate the software of paired device. WTB 200 starts to provide GPS data. Battery charging: Connect WBT-200 with USB cable and turn on power source. To charge it, power source can be supplied from USB host that from computer, power adapter, or car cigarette lighter adapter. 6 Part 5 Operation notes WBT-200 will do self-check once it is powered. Bluetooth and GPS start to work when both Bluetooth LED (glows blue) and GPS LED (glows green ) turns on. GPS automatically starts acquisition and auto-logs. If sky is clear overhead, it requires only 40 sec for acquisition. (If the data in its memory is still valid, it needs only 8~35 sec). After acquisition, WBT-200 starts output data of position, speed and time in NMEA0183 format. For the first time if it is placed at the area well exposed to the satellite signal, this device requires approx 13 min (theoretically 12.5 min) to receive or update Almanac. Refer to trouble shooting guide when signal is not received well...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien