Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
A worksheet of information that will be needed to complete this startup is found on Page 6 of this guide. Make sure you have all the listed information available before starting, either by filling in the worksheet, or from job documents. Several conventions are used in this document. COURIER text indicates screen output or screen menu items. BOLD COURIER indicates user button presses. Navigation through the LCD programming tool menus is via the four buttons to the right of the screen as shown above. They are BACK, UP, DOWN and SEL. Generally, BACK is used to cancel a selection or to move back up through the menu hierarchy. UP/DOWN are used to scroll through selections on a menu or to change values. SEL is used to choose a menu item or to enter a setting. Some menu screens will have an arrow symbol () in the lower right corner. This indicates there are additional menu items for this screen. Use the UP/DOWN keys to scroll down to view the additional items. Primary Handle Control Handle FIGURE 1. CONTROLLABLE CIRCUIT BREAKER Eaton’s Cutler-Hammer controllable circuit breakers have two handles, as shown in Figure 1. The larger black handle is referred to as the primary handle. The primary handle can be turned to the on or off positions by manual control. The smaller green handle is referred to as the control handle. The control handle can be moved to the off or on position by electronic control or to the on position by manual override. LCD Programming Procedure CONFIGURE DATE/TIME 1. Press any key to begin. The Eaton logo will be displayed: Change Date__08/23/06 After a few seconds, the firmware version will be displayed: FIRMWARE VERSION A1 After a few more seconds, the initial status screen will be displayed: Aug 25, 2006 11:28A Group Status: ON: ABC N OFF: DEFGHIJKLM OP Press SEL for menu Press SEL to get to the MAIN MENU. 2. Login If user passwords have been created on your system by your distributor/ installer, you will see the following screen. Use UP/DOWN to enter the letters of your password and the SELkey to advance to the next letter. Advance the cursor past the end of the blanks to submit the password. Aug 25, 2006 11:28A User ID: If this LCD tool has just been powered up, it will have to download a database from the PRC1000 controller. You may see the following screen with the progress indicator: Aug 25, 2006 11:28A Refreshing Database Please wait... 57% Press BACK to quit The database may take up to 10 minutes to download during initial startup. Afterwards, the MAIN MENU will be displayed: MAIN MENU Command Groups ON/OFF Panel Status Screen Configure Groups Configure Date/Time _ Group Status: ON: ABC N OFF: DEFGHIJKLM OP 3. Set Date/Time/DST/Location From the MAIN MENU, select Configure Date/Time. The following menu will be displayed: Change Time 11:37 AM Change DST MANUAL St: mm/dd End: mm/dd Change Astro Loc. Use UP/DOWNto select Change Date. Use SELto move through the date digits. Use UP/DOWN to set the month, day and year, respectively. After setting the year, hit SEL one more time. The new values will be displayed on the PRC1000. Use UP/DOWN to highlight Change Time. Use SEL to move through the time digits. Use UP/DOWN to set the hour, minute and AM/PM, respectively. After setting the AM/PM, hit SEL one more time. The new values will be displayed on the PRC1000. Use UP/DOWN to highlight Change DST. Use SEL to start editing the DST setting. Use UP/DOWN to choose NONE, AUTO or MANUAL. If MANUALis chosen, settings for start and end date will appear. Hit SEL to jump to the start date. Use UP/DOWN to set the month and day values. Use SEL to move through the digits. After setting the DST setting (or dates for MANUAL), hit SEL one more time. The new values will be displayed on the PRC1000. Use UP/DOWN to highlight Change ASTRO-Loc. Hit SEL to start editing the location. The following screen will be displayed: ASTRO LAT: 33.00 LON: 84.00 TIMEZONE: 5 RISE 06:30 SET 07:00 Use UP/DOWN to set the latitude value in degrees. The latitude range is -90 (South) to +90 (North). Note: Sunrise/sunset calculations lose accuracy outside the -62 to +62 range. Hit SELto move to the longitude setting. Use UP/DOWNto set the longitude value in degrees. The longitude range is +180 (Alaska) to -180 (Western Pacific). Hit SEL to move to the timezone setting. Use UP/DOWN to set the timezone value in hours. The timezone range is +12 hours (west of GMT) to -12 hours (east of GMT). After setting the timezone, hit SEL one more time. The new values will be displayed on the PRC1000. The RISE and SET times will update with the new values calculated from the input latitude and longitude and the screen will return to the Configure Date/Time menu. Use BACK to return to the MAIN MENU. 4. Configure Breaker Group A From the MAIN MENU, select Configure Groups. The following screen will be displayed: SELECT GROUP TO CONFIGURE: Group A GRPA OFF GROUP A LIGHTS 15 loads in group. Use up/down/sel to change selection The group is shown, follow...