Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The tape does not feed properly or gets stuck inside the labeler Check that the end of the tape feeds under the tape guides. The cutter lever is pressed while printing. Do not touch the cutter lever during printing. To change the language setting Refer to ‘INITIAL SETTINGS’. If you encounter any problems with this product, do not return the product to the store. After referring to the User guide if you still need assistance, call Brother Customer Service at: Voice: 1-877-BROTHER I Fax 1-901-379-1210 Web: If you need to locate a service center, call 1-877-BROTHER or visit us at our web site. PREPARATION A:Cassette cover B:Tape cutter lever • Open the cassette cover by pressing the above indicated area at the top end of the machine. A:Cutter edge B:Cutter stopper C:Print head • Insert six AAA alkaline batteries. • Make sure the + and – of the batteries are positioned correctly. Note: Only use new batteries. A:Toothed wheel • Make sure that the end of the tape feeds under the tape guides. • If the ink ribbon in the cassette is loose, use your finger to turn the toothed wheel in the direction of the arrow on the cassette until there is no slack. A:Tape exit slot • Insert a tape cassette. • Make sure that the cassette snaps into place. • Close the cassette cover. • After you have installed the tape, feed the tape (see “Feeding”) once and then push in the tape cutter lever to cut the tape. Note: Use only Brother TZ tapes with this machine. RESETTING THE P-TOUCH Reset the P-touch labeler if you want to initialize the settings or in case the labeler does not work properly. • Turn off the labeler. • Hold down and . • While holding and , press once to turn ON the labeler. • Release and . Note: The labeler turns on with its internal factory settings. All text, settings and stored files are cleared. A B A C B A A PRINTING LABELS Display 1. Caps 2. Cursor 3. Size 4. Width 5. Style 6. Label length 7. Underline / Frame Keyboard 8. DECO MODE 9. Print 10.Cursor keys 11.Back Space (BS)/Cancel 12.Function 13.Alphabetic keyboard 14.Accent 15.Space 16.Symbol 17.Caps 18.Time/Date 19.Clear 20.Enter 21.Power Display: 12 characters. Text buffer: maximum 80 characters. Adapter (optional) For memory back up it is recommended to use the batteries together with the (optional) AC adapter (AD-24ES). INITIAL SETTINGS 1. Start your machine • Supply power by using the batteries or the adapter and press . 2. Set the language [ Language] [English / Espanol / Francais / Hrvatski/ Italiano /Magyar / Nederlands/ Norsk /Polski / Portugues /Romana /Slovenski / Slovensky / Suomi / Svenska /Turkce/ Cestina / Dansk / Deutsch] 3. Set the unit of measurement: inch or mm [Unit] [inch/mm] 4. Set date (MM/DD/YY) and time (hh:mm) Example: Setting the date and time for November 21, 2009 10:30AM. [Time Date] [Clock] [MM/01/10] Input “11” [11/DD/10] Input “21” [11/21/YY] Input “09” [hh:00] Input “10” [10:mm] Input “30” [AM/PM] SETTINGS (LABEL DESIGNS) Size [Size] [Large/Medium/Small] In addition to this setting, the text size automatically adjusts to the tape width. The actual printed size varies with tape width. Width [Width] [Normal/x 2/x 1/2] Style [Style] [Normal/Bold/Outline/Shadow/Italic/ I+Bold/I+Outline/I+Shadow/Vertical/] Underline/Frame [Undl/Frame] [Underline] Note: - 8 Frames are available. Refer to table ( ) on the enclosed insertion sheet. - Frames cannot be printed on 9/64" (3.5mm) tape. 1 Underline 3 Leaf 5 Star 7 Bubble 2 Round 4 Tile 6 Heart 8 Flower ENTERING TEXT Upper/Lower case Upper/Lower case: is ON/OFF. Symbols - Basic/Pictograph: For entering symbols. [Basic/Pictograph] [. , : ; " ' •] •Refer to the symbol table (Basic: / Pictograph: ) on the enclosed insertion sheet. •The rows of symbols (A to L) in the Pictograph table can be selected by pressing the corresponding character. •To go to the next group, press (again). - Print List: For printing all symbols in the pictograph table. [Print List] [Print OK?] Two line text • Enter the text for the first line and press . • Enter the text for the second line and press . Note: Do not press after the second line of text otherwise “Line Limit!” error message will appear. Note: Use either 3/8" (9 mm) or 1/2" (12 mm) wide tape when printing two lines of text. Accented characters • Type a character and press . • Choose an accented character with or and press . For a list of available characters, refer to table ( ) on the enclosed insertion sheet. Clear By pressing , the characters will be deleted one by one. • Deleting all text and settings [Txt&Format] • Deleting text only [Text Only] PRINTING LABELS Text preview [Preview] Note:Only the text can be previewed, not the size, font or any additional features. Feed (tape feed) [Feed] Print • Press . Set margin (tape margin) [Margin] [Full/Half/Narrow/Chain Prt] - Full/Half/Narrow: For leaving equal margins on both sides of the text. - Chain print: For creating labels containing text in various styles. 1. When the message “OK to Fee...