Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Brother Dateigröße: 1.74 mb Dateiname: Unterrichtssprache:

. The current style setting is shown by the style indicator at the bottom of the display. 3 Release cto apply the selected style setting to the entire text. EXAMPLE REFERENCE NORMAL STYLE I+SHAD STYLE EXAMPLE REFERENCE NORMAL STYLE I+SHAD STYLE To select the I+SHAD style setting: 1 While holding down c, press 4once, and keep cheld down. 2 While still holding down c, continue pressing 4until I+SHAD is displayed. 3Release c. Font Style Setting Setting NORMAL BOLD OUTLINE SHADOW ITALIC FONT 1 FONT 2 Font Style Setting Setting I+BOLD I+OUTL I+SHAD VERT FONT 1 FONT 2 UNDERLINE FUNCTION UNDERLINE FUNCTION You can emphasize your text by underlining it. The default underline setting is OFF. When the Underline function is set to ON, the Underline indicator on the right side of the display comes on. UNDL ON (Sample) To turn the Underline function on or off: 1 While holding down c, press 5once, and keep cheld down to display the current underline setting. 2 While still holding down c, continue pressing 5until the desired underline setting is displayed. The Underline indicator comes on when the ON setting is selected. 3 Release cto apply the selected underline setting to the entire text. EXAMPLE OFF UNDL ON UNDL To select the ON underline setting: 1 While holding down c, press 5once, and keep cheld down. 2 While still holding down c, continue pressing 5until ON is displayed. 3Release c. FRAME FUNCTION FRAME FUNCTION With the Frame function, you can choose from various frames and highlights to design a more decorative or emphasized label. The default setting is OFF; however, the following five settings are also available. When any setting other than OFF is selected, the Frame indicator on the right side of the display comes on. To change the frame setting: 1 While holding down c, press 6once, and keep cheld down to display the current frame setting. 2 While still holding down c, continue pressing 6until the desired frame setting is displayed. The Frame indicator comes on when any setting other than OFF is selected. 3 Release cto apply the selected frame setting to the entire text. EXAMPLE OFF FRAME To select the candy frame setting: 1 While holding down c, press 6once, and keep cheld down. EXAMPLE TAPE MARGIN FUNCTION EXAMPLE TAPE MARGIN FUNCTION 2While still holding down c, continue pressing 6until the candy frame is displayed. 3Release c. The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text. The default tape margin setting is FULL; however, three other settings are also available. FULL (1" (24 mm) margins) NONE (5/64" (2 mm) margins) NARROW (1/6" (4 mm) margins) HALF (1/2" (12 mm) margins) When a setting other than FULL is selected, extra tape is fed out before printing starts. To change the tape margin setting: 1 While holding down c, press Eonce, and keep cheld down to display the current tape margin setting. 2 While still holding down c, continue pressing Euntil the desired tape margin setting is displayed. 3 Release cto apply the selected tape margin setting to the entire text. EXAMPLE FULL MARGIN HALF MARGIN HORIZONTAL ALIGNMENT FUNCTION To select the HALF tape margin setting: 1 While holding down c, press Eonce, and keep cheld down. 2 While still holding down c, continue pressing Euntil HALF is displayed. 3Release c. You can choose to align the text in one of three ways. In addition, if the Length function was used to set the length of the label, the text will align within the label according to the selected horizontal alignment setting. The default setting is LEFT; however, two other settings are also available. LEFT RIGHT CENTER To change the horizontal alignment setting: 1 While holding down c, press Ronce, and keep cheld down to display the current horizontal alignment setting. 2 While still holding down c, continue pressing Runtil the desired horizontal alignment setting is displayed. 3 Release cto apply the selected horizontal alignment setting to the entire text. EXAMPLE To select the RIGHT horizontal alignment setting: 1While holding down c, press Ronce, and keep cheld down. 2While still holding down c, continue press- ing Runtil RIGHT is displayed. 3Release c. LEFT ALIGN RIGHT ALIGN MIRROR PRINTING FUNCTION This function prints your label so that the text can be read from the adhesive side of the tape. If mirror-printed labels are attached to glass or some other transparent material, they can be read correctly from the opposite side. When using the Mirror printing function, the text should be printed on clear tape. The default mirror printing setting is OFF. ON To turn the mirror printing setting on or off: 1 While holding down c, press ponce, and keep cheld down to display the current mirror printing setting. 2 While still holding down c, continue pressing puntil the desired mirror printing setting is displayed. 3 Release cto apply the selected mirror printing setting to the entire text. EXAMPLE OFF MIRROR ABC ON MIRROR ABC LENGTH FUNCTION T...

Herunterladen

Geben Sie zwei Ziffern: