Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Brother Dateigröße: 493.63 kb Dateiname: pt1700ug01usenes.pdf Unterrichtssprache:

A A AAA + . CODE . 6 I : . CAPS STL UNDL/FRM INSERT l Pressing the key while holding down the key toggles between insert and overwrite mode. . 6 CODE -22 (OVERWRITE MODE) (INSERT MODE) AA AAA AA AAA I : . I : CAPS STL UNDL/FRM CAPS STL UNDL/FRM l Release the CODE key when the display shows “I: ”. l Press the ? '• key. A A AAA J . SMI TH CAPS STL UNDL/FRM To leave INSERT Mode: Holding down the CODE key press the INSERT key again. -23 SETTING THE FORMAT You can print your completed message using a variety of different character sizes, styles, fonts, underline/frames and tape feed settings. Choose character size, style, underline/box and tape feed before printing the label. Note: The type of character you choose will be used for all the characters in your message. It is not possible to have two different character sizes or styles within one message. SIZE There are five different character sizes you can select for your label: 1 - Standard Size W2 - Double Width H2 - Double Height 4 - Double Width & Double Height 8 - 4 x Width & Double Height -24 To choose a character size: (1) Holding down the CODE key, press the SIZE key to change the character size. The size indicator on the display advances in the order shown. 1 W2 H2 4 8 CAPS STL UNDL/FRM A A A A A (2) Stop pressing the SIZE key when your desired character size is indicated. Example To use Double Width and Double Height (4) characters: l Hold down and press until the size indicator is aligned with the A. When the BIG font is selected, the size is fixed to the BIG size whatever the SIZE setting. CODE . SIZE ! 1 CAPS STL UNDL/FRM . SMI THJ A A A A A Note: -25 Note: Note: The size of the characters that can be printed are limited by the width of the tape. Tape width Possible character sizes 3/4”(18mm) 1, W2, H2, 4, 8, BIG 3/4”(12mm) 1, W2, H2, 4, 8 3/8”(9mm) 1, W2, H2, 4, 8 1/4”(6mm) 1, W2 If a character size is set which is not shown in the above table for the tape width being used and the PRINT key is pressed, an error message will be displayed and the label can not be printed. -26 BIG SIZE FONT This machine has a BIG size font in addition to the normal font. The normal size font can be set at the standard size, W2 (double width), H2 (double height), 4 (double width & double height) and 8 (4 . width & double height). If the BIG size font is chosen, all other settings are cancelled. To choose the BIG size font: (1) Holding down the CODE key, press the BIG key. The display shows “NORM” or “BIG”, whichever is the currently selected font size. (2) Pressing the BIG key while holding down the CODE key toggles the displays. (3) Release the CODE key when a desirable font size is selected on the display. It will change as follows: A A AAA NORM CAPS STL UNDL/FRM A A AAA BIG Note: CAPS STL UNDL/FRM . When the BIG size font is selected, all lower case characters are printed in upper case, and the settings for SIZE, STYLE and UNDL/ BOX are ignored. . The BIG size font can only be set when tape with a 3/4” (18 mm) width is used. -27 STYLE There are also nine different print styles: Normal (NORM) Italic (ITAL) Outline (OUTL) Italic + Outline (IT+O) Bold (BOLD) Italic + Bold (IT+B) Shadow (SHAD) Italic + Shadow (IT+S) Vertical (VERT) To choose a print style for your label: (1) Holding down the CODE key, press the STYLE key once. The display will show the current print style. (2) Still holding down the CODE key, press the STYLE key again. The available print styles will appear in order as you press the STYLE key. (3) When the style you want is displayed, release the CODE key. If you select a style other than Normal, the style indicator will be visible on the display. -28 Note: Note: . Only Normal style characters can be printed vertically. . Vertical printing can not be used with some tape width and character size combinations. Example To use Outline print: l Hold down . l Press until the display reads “OUTL”. The style indicator turns on. l Release . CODE STYLE @ 2 CAPS STL UNDL/FRM O UTL A A A A A CODE -29 UNDERLINE/FRAME You can add an underline or frame text when you wish to emphasize it. To add Underline or Box around the text. (1) Holding down the CODE key, press UNDERLINE/FRAME ( ) key. (2) The current style will be shown on the display. (3) Still holding down the CODE key, press UNDERLINE/FRAME key to change the style. It will change as follows: AA AAA AA AAA UNDL/FRM # 3 T EXT B OX4 CAPS STL UNDL/FRM CAPS STL UNDL/FRM A A A A A A A A A A U NDL B OX3 CAPS STL UNDL/FRM CAPS STL UNDL/FRM A A A A A A A A A A B OX1 B OX2 Note: CAPS STL UNDL/FRM CAPS STL UNDL/FRM . Underline & Box are not available simultaneously. . The underline or box will not be printed when the Vertical is used. . Printing of the underline or frame are limited by the tape width and character size setting. -30 Tape width Possible character sizes 3/4” (18 mm) 1, W2, H2, 4, 8, BIG 1/2” (12 mm) 1, W2, H2, 4, 8 3/8” (9 mm) 1, W2, H2, 4, 8 1/4” (6 mm) 1, W2 A triangle indicator on the display appears whethe...

Herunterladen

Geben Sie zwei Ziffern: