Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
There is no need to install any software or drivers onto your PC in order to make creative labels. This manual includes important precautionary information and simple instructions for operating your new P-touch labeller. Be sure to read the instructions before use and use the product in accordance with these instructions. Keep this manual handy for future reference. If new versions of the PT-2430PC software become available, this manual may not refl ect the updated features. Therefore, you may fi nd that the software and the contents in this guide are different. Declaration of Conformity We BROTHER INDUSTRIES, LTD. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that the P-touch Labeller PT-2430PC conforms with the following normative documents: EMC: EN 55022: 2006 Class B EN 55024: 1998 + A1: 2001 + A2: 2003 EN 61000-3-2: 2006 EN 61000-3-3: 1995 + A1: 2001 + A2: 2005 and follows the provisions of the Electromagnetic Compatibility Directive 2004/108/EC. The AC adapter AD-24ES also conforms with EN 60950-1: 2001 and follows the provisions of the Low Voltage Directive 2006/95/EC. Issued by: BROTHER INDUSTRIES, LTD. Quality Management Dept. SAFETY PRECAUTIONS WARNING • Always use the specifi ed voltage and the included AC adapter (AD-24ES) for this machine to prevent any damage or failure. • Unplug the power cord immediately and stop using the P-touch labeller during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use the AC adapter in places of high humidity such as bathrooms. • Do not overload the power cord. • Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend or pull the power cord. When disconnecting the power cord from the power outlet, always hold the plug. • To prevent fi re or electric shock, make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. • Do not get the machine/AC adapter/power plug wet, such as by handling them with wet hands or spilling beverages onto them. • Do not disassemble or modify the P-touch labeller/AC adapter/batteries. • Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the batteries. • Do not throw into fi re or heat up the battery. • Disconnect the AC adapter, remove batteries and stop using immediately if you notice any abnormal odour, heat, discolouration, deformation or anything unusual while in use, or in storage. CAUTION • To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the print head. • Remove the batteries and disconnect the AC adapter if you do not intend to use the P-touch labeller for an extended period of time. • Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. Otherwise, the batteries may leak or be damaged. • To prevent damage or breakage, do not drop or hit the P-touch labeller/AC adapter. • Use only the USB cable included with the P-touch labeller. General Precautions • Depending on the location, material, and environmental conditions, a label may unpeel or become irremovable, the colour of a label may change or be transferred to other objects. Before applying labels, check the environmental condition and the surface material. • Do not use the P-touch labeller in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to the machine. • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not clean the P-touch labeller with alcohol or other organic solvents. Only use a soft, dry cloth. • Do not touch the print head with your fi ngers at any time, to prevent the possibility of burns. Use a soft wipe (e.g. a cotton swab) when cleaning the print head. • Do not put any foreign objects into the tape exit slot or AC adapter connector, etc. • Do not place the P-touch labeller/battery in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g. on the dashboard or in the back of your car), high humidity, or dusty locations. • Do not try to print labels using an empty tape cassette in the P-touch labeller. Doing so will damage the print head. • Do not pull the tape being fed from the P-touch labeller, otherwise the tape cassette or P-touch labeller may be damaged. Open the cassette cover. Insert a tape cassette. Close the cassette cover. Verify that the P-touch labeller is turned off. Open the cassette cover as shown by the arrow in the above illustration while pressing the "<<" section of the tape cover. Insert a tape cassette as shown in the above illustration. • Make sure that the end of the tape feeds under the tape guides. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. • Use only Brother tapes with the P-touch labeller. • For initial use...