Stimmen - 5, Durchschnittliche Bewertung: 4.6 ( )

Hersteller: Pitney Bowes Dateigröße: 19.2 kb Dateiname: DM200i,_DM300i,_DM400i,_DM300L,_DM400L_Phoenix_AW21379.pdf Unterrichtssprache:

The new rates you download today will automatically activate on May 11. RCG8XX 1 Prepare to get new rates 2 As you normally would for a postage refill, • Connect your meter to an analog phone line. Connect to Pitney Bowes From the Ready screen, • Press the Options key. • Select Setup Menu. • Select Updates and Add-Ons. • Select InteHiLink - Get Update. (A series of communications messages will appear on the screen.) 3 Get new rates 4 When the screen displays “Update Available”, • Press the Yes key. (A series of communications messages will appear on the screen. This will take about 3 minutes.) If you are prompted to update your presets, it is suggested that you DO NOT update your presets at this time. Instead, after your rate update is complete, use our NEW & IMPROVED method for setting up presets on the reverse side. 5 CONGRATULATIONS! New rate shown below will appear on May 11,2009 You will know the rates have successfully downloaded when your system returns to the Ready screen. New rates will take effect on May 11. Continue on reverse side. ► OR Printing Not Available Ready screen when Control Center is connected to Mailing Machine Base Ready screen when Control Center is not connected to Mailing Machine Base 2 Never update your presets again! Set your presets to update automatically when postal rates change. If you set up presets based on postal classes (for example, First Class Letter) instead of postage amounts (for example, $0.44), your presets will update automatically when postal rates change. Here's how: 1 Check current preset From the Ready screen, • Press the Normal Preset key. If the screen shows “Class: None”: OR Proceed to step 2 below. If the screen shows a postal class (for example, “Class: 1stReg Letter”): xxx.xx.xxxx $X.XX Class: 1stReg Letter Ready to Print Stop here! There is nothing else you need to do! 2 Choose a class • Press the Class key. • Make sure to have Use attached scale or Enter manual weight selected before selecting Change Class. • Select Change Class. • Set up a class of mail (for example, select 1st Class Reg, followed by Letter). • Confirm that the screen now shows the correct class (in this example, it should read “Class: 1stReg Letter” and “0.44”). New rate shown below will appear on May 11,2009 $0.44 0 lb 1.0 oz May 11.2009 Class: IstReg Letter _Ready to Print_ 3 4 Set up preset • Press the Options key. • Select Setup Menu. • Select Preset- normal/custom. • Select Store Current Settings. • Select Normal Preset. • Press the Enter key. CONGRATULATIONS! When the system returns to the Ready screen, your normal preset has been updated. From now on, your normal preset will automatically update when the rates change. You’ll never need to do it again! New rate shown below will appear on May 11,2009 $0.44 0 lb 1.0 oz May 11.2009 Class: 1stReg Letter _Ready to Print_ For additional assistance with your rates update, visit www.pb.com/ratecha...

Herunterladen

Geben Sie zwei Ziffern: