Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
3 Remove the label spool from inside the top cover and pull the spool guide from the spindle. Figure 5 4 Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. See Figure 5. Slide label guide against labels Slide label guide against labels 5 Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool. See Figure 6. NOTE To ensure proper feeding of labels during printing, the label roll must fit snugly against both sides of the label spool, with no gaps. 6 Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 7. 7 Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot. See Figure 8. The printer automatically feeds the label, stopping at the beginning of the first label. Figure 7 If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button. Align labels against left If the first label on the roll is not a full label, press the edge form-feed button to eject the partial label. 8 Slide the label guide to the left until the label guide aligns with the right edge of the label. See Figure 8. Make sure that the label guide does not pinch the label. 9 Carefully lower the top cover. Figure 6 Figure 8 To load a label cassette 1 Press the button on the front of the printer to open the label cassette tray. NOTE The first time you use the printer, remove the protective cardboard insert from the label exit slot. See Figure 9. 2 Make sure the label and ribbon are taut across the mouth of the cassette and that the label passes between the label guides. If necessary, turn the ribbon rewind spool clockwise to tighten the ribbon. 3 Insert the cassette and press firmly until the cassette clicks into place. Make sure label and ribbon are positioned correctly. See Figure 10. 4 Press the button on the front of the printer to close the label cassette tray. Remove cardboard insert Figure 9 Push down gently Figure 10 5. Printing your First Label The first time you open the application, you are asked to register the software. Registering the software ensures that you will be informed of any software updates. During the registration process, you will be asked to enter the serial number for your label printer. The serial number is located on the bottom of the printer. To print your first label 1 Start DYMO Label software by doing one of the following: • For Windows, click Start, then Programs>DYMO>DYMO Label v.8. • For Macintosh, double-click the DYMO Label icon in the Applications folder. The first time you start DYMO Label software, a list of available label types is displayed on the left side of the window and an address label is displayed in the Edit area. (See Figure 11.) 2 Click once in the address label in the Edit area and type some text. 3 Optionally, choose a font and a justification setting from the Formatting toolbar. 4 Click to print the label. To print a D1 tape label 1 Select a tape label from the Labels tab, and then select a layout. Make sure that the width of the tape label you select matches the width of the label cassette loaded in the label cassette tray. 2 Click once on the tape label in the Edit area and type some text. 3 Optionally, choose a font and a justification setting from the Formatting toolbar. 4 Click to print the label. Figure 11 highlights some of the major features available in DYMO Label software. Visually choose your label type and apply layouts. Insert text, addresses, images, shapes, lines, barcodes, dates, and counters. Store your favorite addresses in the Address Book or view your Outlook or Mac Address Book contacts; automatically insert addresses on your label. Figure 11 For complete details on using the software, refer to the online Help. From the Help menu, you can view the following: • DYMO Label v.8 Help • DYMO Label v.8 User Guide • LabelWriter Printer User Guide Print postage using DYMO Stamps software. Verify and correct addresses on your label. Select a printer to print your labels. 10 Printing Postage with DYMO Stamps You can now print postage right from your desktop using your LabelWriter Duo label printer. All you need is DYMO Stamps software, your LabelWriter printer, DYMO Stamps labels, and an Internet connection. To install DYMO Stamps and print postage 1 Sign up for your USPS account with Endicia. Go to: 2 At the end of the sign up process, download and install the DYMO Stamps software. DYMO Stamps software is available for both Windows and Mac OS X. NOTE You must have DYMO Label software and your LabelWriter printer installed before installing the DYMO Stamps software. The first time you start the DYMO Stamps software, you are pr...