Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
DYMO and LabelWriter are registered trademarks of Sanford, L.P. All other trademarks are the property of their respective holders. Quick Start Guide Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer NOTE Do not plug the printer into your computer until asked to do so during the software installation. 1 Unpack your printer and save the packing materials. 2 Make sure you have all the items shown in Figure 1. (Labels included in the package may vary.) Roll of Switching Adapter SHOCK HAZARDRISK OF ELECTRICSHOCK DRY LOCATION USE ONLY. NON-SERVICEABLE PARTS INSIDE.FOR USE WITH ITE ONLY.END AST FOR KONTORSMASKINER. CAUTION Testedtocomplywith FCCstandardsFOR HOME OROFF ICE USE I.T.E. POWER SUPPLY C Model No.:TESA2-2401000 U.S.P/N:90819Europe P/N: 924883INPUT:100-240V-50/60HzMax0.64A OUTPUT:24V ---0-1.0A MADE IN CHINA LISTED15WM E198850 ULULN10926 LabelWriter Quick Start Power adapter CD-ROM Roll of Address labels Power cable Quick Start Guide USB cable D1 label cassette DYMO Stamps labels LabelWriter printer Figure 1 Your LabelWriter printer is a thermal printer and does not use toner or ink cartridges. Instead, it uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies you will ever need to buy. Become familiar with the printer’s major components. See Figure 2. and tear bar Form-feed button and LED Tape tray release button DC power USB Label exit connector connector slot Label feed path cover Label roll Top Platen release Label ejectbutton Label spool Figure 2 LabelWriter Printer Features The form-feed button on the front of the printer is used to advance a single label. The label eject button is used to remove labels from the printer when changing rolls. The tape tray release button opens the tape tray to insert or remove a label cassette. The LED status light allows you to visually determine the current state of the printer: • Solid blue - power is on and the printer is ready. • Flashing blue - labels are not loaded properly or label spool is empty. 2. Installing the Software NOTE Do not connect the printer to your computer until instructed to do so during the software installation. To install the software on a Windows system 1 Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the installation screen appears. If the installation screen does not appear: a. Click Start, then Run on the Windows taskbar. The Run dialog box appears. b. Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive) and click OK. 2 Click Install and follow the instructions in the installer. To install the software on a Mac OS system 1 Insert the DYMO LabelWriter CD into the CD-ROM drive. After a few seconds, the DYMO Label Software Installer icon appears. See Figure 3. Figure 3 2 Double-click the Installer icon and follow the instructions. If you do not see your printer in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer. DYMO Label 3. Connecting your LabelWriter Printer Power Adapter NOTE Do not connect the printer to your computer until instructed to do so during the software installation. Power Cord To connect the power Figure 4 1 Plug the power cord into the power adapter. See Figure 4. 2 Plug the power adapter into the power connector on the back of the printer. See Figure 5. 3 Plug the other end of the power cord into a power outlet. Switching Adapter SHOCK HAZARDRISKOFELECTRICSHOCK DRY LOCATION USE ONLY. NON-SERVICEABLEPARTS INSIDE. FOR USE WITH ITE ONLY. END ASTFORKONTORSMASKINER. CAUTION Tested to comply with FCC standards FORHOME OR OFFICE USE I.T.E. POWER SUPPLY C ModelNo.:TESA2-2401000 U.S. P/N:90819Europe P/N: 924883INPUT:100-240V-50/60Hz Max0.64A OUTPUT:24V --- 0-1.0A MADE INCHINA LISTED15WME19885 0 ULULN10926 Power USB 4 Plug the USB cable into the USB port on the back Figure 5 of the printer. See Figure 5. NOTE DO NOT CONNECT the other end of the USB cable to your computer until asked to do so during the software installation. 5 When prompted by the software installer, plug the USB cable into a USB port. USB Port Figure 6 4. Loading Labels The LabelWriter Duo printer prints two types of labels: die-cut paper labels (such as Address or DYMO Stamps™ Postage labels) and D1 label cassettes. To load die-cut labels Spool Spool spindle guide 1 Press the form-feed button to eject the labels that protected the printer during shipment. 2 Open the top cover and remove any packing material inside the label compartment. Figure 7 3 Remove the label spool from inside the cover. 4 Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is flush against the side of the spool. See Figure 7. 5 Place the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no ga...