Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Timex Dateigröße: 741.89 kb Dateiname: Unterrichtssprache:

Features such as Heart Rate target zones, speed/pace alert settings and Chrono hands-free features are set here. TIP: Press and hold the MODE button for 1.5 seconds to return to Time of Day from any other mode. The Display Your Timex® Performance Monitor is capable of conveying a lot of information at a glance while occupying only a small space on your wrist. Here is a quick overview of what the symbols on the watch display mean: TIMER IS RUNNING GPS BATTERY VOLTAGE IS LOW (ARROW INDICATES TIMER SET TO BODYLINK™ SYSTEM IS ACTIVE, REPEAT) FLASHES DURING DATA OUTAGES AT LEAST ONE ALARM IS ARMED, FLASHES DURING BACKUP PERIOD NIGHT-MODE IS ACTIVATED HOURLY CHIME IS ENABLED CHRONO IS RUNNING Button Functions Here is a second example of the button functions in Lap Data Most of the time, the button functions correspond to the labels mode. Here the buttons change their functions to enable you to that are painted on the case. However, there are situations where navigate through the stored lap data. Again, the new function of the button functions have to change to enable you to set the Time each button is indicated on the watch display. of Day, or configure your heart rate target zone. In situations like these, the button’s new function will be indicated by an icon or text visible on the watch display. Here is a second example of the button functions in Lap Data Most of the time, the button functions correspond to the labels mode. Here the buttons change their functions to enable you to that are painted on the case. However, there are situations where navigate through the stored lap data. Again, the new function of the button functions have to change to enable you to set the Time each button is indicated on the watch display. of Day, or configure your heart rate target zone. In situations like these, the button’s new function will be indicated by an icon or text visible on the watch display. Next For example, here is how the buttons function while setting the INDIGLO data value () to the symbols visible on the display: Time of Day. Notice how the functions of the buttons correspond Increase (+) To next mode/ Hold to go to INDIGLO Previous Time of Day data value Select () next value It isn’t necessary for you to remember the exact function of the buttons in each mode; simply remember this: When a button setting Done Decrease function changes from it’s normal operation, the watch will (–) remind you of the new functionality by displaying the new button function. 1-12 1-13 Starting the Bodylink™ System When using the Performance Monitor, you can view real-time data from a Heart Rate Sensor or Speed + Distance Sensor, or both, in Time of Day, Chrono and Timer. The procedure to do this is the same in all modes, though the data that you can view and their position on the display in each mode will vary. 1. Make sure you’re wearing your Heart Rate Sensor or Speed + Distance Sensor, or both, and that they are powered up and functional. 2. Stand at least 6 feet (2 meters) away from any other users of fitness monitor systems and from any source of radio interference such as electrical equipment, power lines, etc. NOTE: Though the Bodylink™ system has a working range of about 3 feet (1 meter) from the sensors to the watch, for the most reliable operation, make sure that the watch is as close to the sensors as possible when starting the system up. 3. Press and release the DISPLAY button. This tells the watch to look for any Bodylink™ sensors nearby; it will search for one minute. The antenna icon will appear on the watch display, indicating that the Bodylink™ system is active. NOTE: As a convenience, Chrono and Timer will automatically search for Bodylink™ sensors for fifteen seconds upon entering the mode. 4. When the watch has successfully detected transmissions from the sensors, the watch display will switch to a new format showing some or all of the sensor data, depending on the mode. Time of Day and Timer show the data in the lower line exclusively, while Chrono allows up to three lines of performance data. Viewing Performance Data Press and release the DISPLAY button to select the data or combination of data that you wish to view during your workout. For your convenience, a “banner” showing the names of the information and their position on the display is shown briefly before showing the data itself. Here are a few more things you should know to use the watch effectively: • While in the Chrono, press and release SET/FORMAT to swap the positions of the information in the upper and middle display lines. This allows you to view the data most important in the larger middle display line. • If you want to stop monitoring data from your Bodylink™ sensors, hold the DISPLAY button down until the message HOLD TO SHUT OFF RCVR is displayed on the watch display. Continue holding the DISPLAY button for a few more seconds; the watch will beep indicating that the radio link between the watch and the sensors has been shut down. TIP: If you...

Herunterladen

Geben Sie zwei Ziffern: