Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
No part of this publication may be reproduced, transmitted, transcribed, or translated into any language in any form by any means without the written permission of A&D Company Ltd. The contents of this manual and the specifications of the instrument covered by this manual are subject to change for improvement without notice. i WARNING DEFINITIONS The warnings described in this manual have the following meanings: WARNING Important information to alert you to a situation that might cause injury and/or damage to your property if instructions are not followed. CAUTION Important information to alert you to a situation that might cause minor injury and/or damage to your property if instructions are not followed. Note Important information that helps users operate the device. ii COMPLIANCE Compliance with the European Directive 93/42/EEC for Medical Products This device conforms to the following requirements: European Directive 93/42/EEC for Medical Products act; Medical Products Act; European Standards for Electrical Equipment EN 60601-1 (General Safety Provisions), EN 60601-1-2 and EN 55011 (Electromagnetic Compatibility); European Standards pertaining to Non Invasive Blood Pressure Instruments EN 1060-1(General Requirements), EN 1060-3 (Supplementary Requirements for Electromechanical Blood Pressure Measuring Systems). This is evidenced by the CE mark of conformity accompanied by the reference number of a designated authority. This device was designed for use by adults only. Compliance with the Australian EMC Frame Work This device conforms to the following requirements: EMC Emission Standard for Industrial, Scientific and Medical Equipment AS/NZS 2064-1997, EMC Generic Immunity standard AS/NZS 4252.1-1994. This is evidenced by the C-Tick label. Environment for use The device is for use in offices, sports facilities, and hospitals (waiting rooms), etc. NOTE This device does not have the function of automatic cycling measurement. Therefore, a part of this device does not conform to IEC60601-2-30. iii SAFETY PRECAUTIONS WARNING Grounding To avoid electrical shock, connect the power cable to a medical electrical outlet having a ground terminal for grounding the device. Fuse To avoid a fire hazard, use only a fuse of the proper type, voltage and current rating as specified on the rear panel. Never bypass a fuse by shorting across the fuse holder and connectors. Service Internal service or adjustment to this device should be performed by a qualified person only. Do not disassemble or modify the device Device failure If a device failure occurs, promptly stop using it. Remove the device from the patient and secure the patient’s safety. Turn the power off and disconnect the power cable from the electrical outlet. Affix a notice such as “Out of Order” and “Do Not Use” on the device. Ask the nearest dealer for services To interpret blood pressure measurements Only a trained medical professional is qualified to interpret the blood pressure measurements. No device can replace regular medical checkups by a doctor. A doctor should verify the blood pressure measurements before making adjustments to medication. When the device gets wet because of a liquid spill If the device gets wet, promptly stop using it. Remove the device from the patient and secure the patient’s safety. Turn the power off and disconnect the power cable from the electrical outlet. Affix a notice such as “Out of Order” and “Do Not Use” on the device. Ask the nearest dealer for service. CAUTION In case of emergency Press the EMERGENCY STOP switch located on the front of the device. This will release the air in the arm cuff so that the arm can be removed easily. It also operates if there is a power failure. To stop the operation at any time Press the START/STOP switch located on the display panel. The quick exhaust will release the air in the arm cuff and the arm cuff will become loose. Maintenance/Inspection Check all functions periodically. Ask the nearest dealer for this inspection. Do not disassemble or modify the device. If the device is used for the first time after an extended period of storage, check the device for proper operation. iv GENERAL PRECAUTIONS Obey the following precautions for safe and correct usage. Precautions unique to the TM-2655/TM-2655P appear on the relevant page in this manual. Read the manual thoroughly before use. When installing and storing the device .. Install or store the device away from moisture. .. Do not install or store the device where the device may be badly affected by extreme temperature, humidity, direct sunlight, draft, dust, salinity or sulfur content in the air. .. Do not install or store the device where chemicals, and corrosive or explosive gases are stored or present. .. Install or store the device in a secure, level and stable location. .. Install or store the device where adequate power is provided. (Where a medical 3P electrical outlet is provided.) Before use .. Check to make sure the device operates safe...
Dieses Handbuch ist für folgende Modelle:Herzfrequenzmesser - TM-2655P (615.79 kb)