Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
The Dual Split time will be frozen for five seconds. After five seconds, the Display returns to the running CUM and LAP times. Press STOP button to stop the stopwatch. The last Dual Split time will also be stored (provided that the last spilt time Is not the first split time). The stopwatch can store up to 100 Dual Split times. The fastest lap, the slowest lap and the averages of all laps will also be recorded. When there are five free memories left, the Icon “FULL” will blink to remind you of the nearly full situation. Whenever the storage Is full, extra Split times will not be stored Into memory but will still be shown on the display. Any new fastest and slowest laps will not be stored. The memory counter will flash “100" as the extra Spilt times are being displayed. The Icon “FULL” will be steadily ON. You can clear the memories by stopping and resetting the watch. To stop the stopwatch, press STOP. The Indicator “STOP" will come on again to show the status. Press RECALL button to review the saved Dual Split times, including Fastest Lap, Slowest Lap and Average Lap times. “RECALL” will be shown for a second. The CUM and LAP Spilt time will be displayed on the upper and the middle display, respectively. The lower display shows the current running CUM time, unless it has been stopped. The Fastest LAP time will be reviewed first. Then the Slowest LAP time with next push of RECALL button. Then the Average LAP time. Press RECALL to review each of the stored Spilt times. The recall starts from the last Spilt to the first Split when the stopwatch Is running and vice versa when the stopwatch has been stopped. During memory recall, press either START, STOP or SPLIT button to make a Start, Stop or Split action and continue operating Stopwatch. After recalling to the first spilt time, press RECALL once more to automatically exit from Memory Recall mode and return to Stopwatch Operate mode. The "RECALL" Icon will be OFF. Press RESET after the stopwatch stops to reset the stopwatch display. When the stopwatch starts running from Reset state, all the lap memories will be cleared. The Event’s saved times remain In the Stopwatch Memory available for RECALL, until the START of the next event. The Events’ Split times ARE saved in the DATA Memory for later recall In DATA mode. c o Oh cc M C 3 'i OC X 0\ < U © ti c & & 3 a • I a O £ o /) (N 0\ w x (N < '-D OC d 00 S oc M c H 'A E