Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Groupe SEB USA - T-FAL, modell Oleoclean Thermostat

Hersteller: Groupe SEB USA - T-FAL
Dateigröße: 971.14 kb
Dateiname: d0cd212c-be8f-4689-8e84-3454c6f2a1b4.pdf

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


However, the day when you decide to replace your appliance, don't forget to think about how you can help to protect the environment. • Dispose of it at your local waste disposal centre. Read the directions for use and carefully follow instructions. Safety instructions • This appliance complies with safety rules and conditions in force together with Directives : -89/336/EEC amended by 93/68/EEC. -72/23/ CEE amended by 93/68/EEC. • Check that the mains voltage corresponds correctly to that shown on the appliance (alternating current). • Bearing in mind the diversity of standards in existence, if the appliance is used in a different country from that in which it was purchased, have it checked by an approved service centre. • Use a stable flat work surface away from water splashes. • Never leave the appliance running without supervision. Do not leave it within the reach of children. • Do not leave the cord hanging down. • Always plug the appliance into an earthed connection. • Do not unplug the appliance by pulling on the cord. • Do not use the appliance if : - the appliance or its cord is faulty, - the appliance has fallen and shows visible damage or signs of faulty operation. In this case, the appliance must be sent to an approved Service Centre. • This appliance operates at high temperatures which can cause burns. Despite the good heat protection, do not touch the appliance's hot surfaces (filter, viewing window, etc.). • If the power supply cord is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person so as to avoid any danger. • Always unplug the appliance : - as soon as you have finished using it, - if you want to move it, - each time you want to service or clean it. • Never immerse the appliance in water ! • Do not move the appliance while it contains liquids or hot foods. • Never try to take the bowl out while the fryer is in operation. • This product is designed for domestic use only. Any inappropriate use, commercial use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. ENGLISH ENGLISH Description 1 Lid 2 Viewing window 3a Anti-odour carbon filter 3bFilter handling tabs 4 Basket 5 Basket release button 6 Handle for raising and lowering basket 7 Non-stick removable bowl 8 Bowl fill level marks (1L/2L) 9a Filter grid 9bAutomatic drain valve 10 Housing 11 Cord holder 12 Lid opening buttons 13 Carrying handles when cold 14 Container fill tube 15 Container lid cap (for emptying) 16 “OIL BOX” oil/fat container 17 Drain button 18 Plug with cord 19 Control panel 20 Temperature light 21 Thermostat WORLDWIDE EXCLUSIVITY Filtration, drainage and automatic storage of oil/fat Oleoclean is fitted with an exclusive and patented system for filtration and automatic drainage, suitable for most types of oils and fats used for cooking. Thanks to the OIL BOX container, you can store your oil or fat and keep it until you next want to use it. -The drainage of oil is completely automatic and does not need any special handling, which makes it totally safe. -Thanks to the automatic filtration system, your oil/fat stays clean and lasts longer for healthier frying. -Separate OIL BOX containers can be used to store oil/fat used for frying different types of food (chips, fish, doughnuts, etc.) to avoid any transfer of flavours. Dismantling the fryer Open the lid by pressing on one of the two buttons and pull it away from the fryer -Fig. Remove the oil/fat container - Fig. Lift the basket handle until you hear a “click” as it locks - Fig. Remove the basket. After pulling the cord towards the front, remove the control panel - Fig. Take out the bowl from the housing. 1 2 3 4 Unscrew (1) the drain valve located on the bottom of the bowl. Remove the drain valve (2) and filter grid (3) - Fig. 5 Preparation for use Cleaning the fryer Remove the protective film from the underside of the viewing window (depending on model). Clean all parts (except the control panel) with a sponge and washing-up liquid or put them through the dishwasher - Fig. Dry them off. 6 For good visibility through the window, see chapiter Cleaning. Never immerse the control panel and cord in water. Ensure that the anti-odour filter is dry before frying. Reassembling the fryer Important : while replacing the automatic drain valve ensure that the seal is placed correctly under the 3 lugs designed for this purpose. Place the filter grid in the bowl (domed side facing you) - Fig. Turn the bowl over holding the filter grid. Place (1) the automatic drain valve flat on position O. Turn (2) to position I - Fig. Replace the bowl then the control panel. 7 Position the cord to the right side in the cord channel. Turn the oil/fat container's drain button anti-clockwise to the closed position -Fig. 9 and slide the empty container in the fryer. Follow the diagram shown on the underside of the bowl. Do not misalign the position of the drain button. Do not force ...

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien